Interlink electronic L485RSIB, L485RSB Lighting Instructions, Control knob to the ‘off’ position

Page 7
Off Position

7

Lighting Instructions

Side Burner

Lights Left Burner Rear Burner Centre Burner Right Burner Side Burner Igniter

WARNING! Open lid

WARNING! Ensure all burner controls are in the off position. Turn on the gas supply valve.

Main Tube Burner

Rear Burner Lighting

Side Burner Lighting

Lighting

(If equipped)

(If equipped)

 

 

 

1. Open grill lid.

1. Open grill lid.

1. Open/Remove side burner cover.

 

 

 

2. Push and turn any main burner

2. Remove the warming rack

2. Push and turn side burner control

knob slowly to the ’hi’ position. This

 

to high position.

action will ignite the pilot flame which

 

 

will in turn light the selected burner. If

 

 

the pilot lights, continue to push down

 

 

on the control knob until the burner

 

 

lights and then release.

 

 

 

 

 

3. If the pilot does not ignite, then

3. Clip a match into the supplied

3. Press and hold

immediately turn the control knob

lighting rod. Hold a lit match to

igniter button until burner lights, or

back to the ‘off position and repeat

right end ports of rear burner. Turn

light by match

step 1 several times.

rear burner to high.

 

.

 

 

 

 

 

4. If the pilot and burner will not

 

4. If the burner will not ignite within

ignite within 5 seconds, turn the

 

5 seconds, turn the control knob to

control knob to the ‘off’ position and

 

the ‘off’ position and wait 5 minutes

wait 5 minutes for any excess gas to

 

for any excess gas to dissipate. Either

dissipate. Either repeat steps 1 and 2

 

repeat steps 2 and 3 or light with a

or light with a match.

 

match.

 

 

 

WARNING! The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames and low heat will be achievable.

WARNING! Do not use the rear burner (rotisserie burner) with the main burners operating.

WARNING! If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit match down through the grill and sear plate while turning the corresponding burner valve to high.

www.ultrachefgrills.com

Image 7
Contents If YOU Smell GAS L485, L485RB, L485SB L485SIB, L485RSB, L485RSIBConditions And Limitations Ultra Chef GAS Grill Limited WarrantySafe Operating Practices Electrical Precautions Cylinder Specification/Gas Hook UpPropane Cylinder Specifications Natural Gas Hook-Up Propane Cylinder InstallationLeak Testing Instructions Control knob to the ‘off’ position Lighting InstructionsOperating The Grill Infrared Heat Replacement Screen N565-0002In. thick Infrared Grilling ChartMaintenance / Cleaning Instructions Page Troubleshooting Problem Possible Causes Solution Warranty Information Ordering Replacement PartsGetting Started Tools Required for Assembly tools not includedCaster/Bracket Installation Magnet InstallationLeft and Right Cart Panel Installation Propane Tank Ring InstallationPropane Only Ensure power bar is installed with covers to the top Transformer/Rear Cart Panel InstallationTank Inhibitor Bracket / Propane Tank Mount Installation Heat Shield Installation Front Cabinet Support InstallationGrill Head Installation Correct Assembly Incorrect AssemblyTwo people are required for this step Battery Pack / Rotisserie Mount Installation RSB Model Transformer / Rotisserie Mount Installation Rsib ModelAssembling Handles to Side Shelf Side Burner Installation Side Shelf Installation485RSB Model Bushing Cabinet Door InstallationGrids and Warming Rack Installation Sear Plate InstallationDrip Pan Installation Grease Tray and Holder InstallationRotisserie Kit Assembly Instruction Power Supply To Rotisserie Motor To Transformer Providing Power To Your Grill 485RSIB Model onlyPropane Only Improper Hose Connection Propane Only Proper Hose ConnectionNatural Gas Only Proper Hose Connection Natural Gas Only Improper Hose Connection Leak Testing Instructions Description Parts ListReplacement grease trays foil 5 pieces Parts Diagram 485RSB Parts List Left/right side panel cabinet enclosure Replacement grease trays foil 5 pieces 485RSB Parts Diagram 485RSIB Parts List Left/right side panel cabinet enclosure 485RSIB Parts List 485RSIB Parts Diagram Page FAX to 705 727

L485RSIB, L485SB, L485, L485SIB, L485RSB specifications

Interlink Electronics has become a prominent player in the field of touch and control technologies, and their L485 series proves to be a significant advancement in this domain. The L485RB, L485RSB, L485SIB, L485, and L485SB models each bring unique features and capabilities tailored for various applications.

The L485 series primarily focuses on enhancing human-machine interface (HMI) systems, offering a blend of reliability and durability. A key feature across this series is the use of robust capacitive sensing technology, which ensures precise touch detection, even in challenging environments. This technology contributes to seamless user experiences in industrial settings, healthcare applications, and consumer electronics.

The L485RB model boasts a rugged design with a high degree of resilience to environmental stressors, making it suitable for outdoor use. It has an IP65 rating, indicating excellent resistance to dust and water ingress. This is essential for devices deployed in harsh conditions, ensuring longevity and consistent performance.

In contrast, the L485RSB focuses on providing enhanced functionality, integrating customizable features tailored to specific user needs. With programmable touch zones and sensitivity adjustments, the L485RSB allows developers to create bespoke solutions for unique applications, ensuring flexibility and adaptability.

Meanwhile, the L485SIB is specialized for medical environments, incorporating antimicrobial coatings that mitigate the growth of pathogens. This is crucial in healthcare settings where hygiene is paramount. The model not only prioritizes user safety but also complies with relevant medical standards, ensuring it is fit for purpose in sensitive applications.

The standard L485 model serves as a versatile option, perfect for general-purpose applications. It balances advanced touch capabilities with user-friendly features, making it easy for developers to integrate into various devices. Additionally, the model supports multiple interfaces, including USB and I2C, enabling seamless communication with other electronic components.

Lastly, the L485SB variant features a simplified design that allows for easier integration into existing systems, minimizing the learning curve for developers. Its compact form factor coupled with powerful performance characteristics makes it ideal for innovative consumer electronics.

In summary, the Interlink Electronics L485 series exemplifies the convergence of advanced technology and practical applications. With features tailored for diverse environments, from industrial to medical, the L485RB, L485RSB, L485SIB, L485, and L485SB models showcase the brand’s commitment to quality, performance, and user-centric design. Each model in the series stands out with distinct characteristics, ensuring that there is a suitable option for every potential application.