23
2 x | 1 x | 3/8”(10mm) |
|
|
|
10. Transformer / Rotisserie Mount Installation (RSIB MODEL)
Connect the two wire connectors from the lights to the two wire connectors coming from the transformer. Install rotisserie mount bracket to left side of barbecue as shown using (2) 1/4 – 20 x 3/8” screws.
Battery Pack / Rotisserie Mount Installation (RSB MODEL)
Install battery pack below vent slots on left hand panel using magnet supplied with battery pack. Plug wire from LED (lights) located underneath control panel into wire from battery pack. Install rotisserie mount bracket to left side of barbecue as shown using (2) 1/4 – 20 x 3/8” screws.
Clip wires from lights to side panel using retainer clip supplied.
485RSIB MODEL
www.ultrachefgrills.com