Simplicity Turbo Wide Body Cart & Hitch manual Hitch Installation, SunStar/1900 Series Mfg. No

HITCH INSTALLATION

SunStar/1900 Series (Mfg. No. 1691526)

1.Install the U-bracket (A, Figure 22) with two 1/2-13 x 1 1/4 capscrews (B), 1/2 lockwashers, and nuts. At top hole on each side, install two 7/16-14 x 1-1/2 cap screws (C), lockwashers and nuts.

Note: The U-bracket (A, Figure 22) is an accessory hitch with additional ear for tiller attachment. U-bracket (19, Figure 1) supplied with cart mounts in same location with supplied hardware.

2.See Figure 22. Position brackets (D) with large hole

(E) at bottom of each side. In large holes (E), install 5/8-11 x 1-1/4 capscrews, lockwashers and nuts.

3.In top holes of bracket (D), install two 7/16-14 x 1/2 capscrews (F), 7/16 lockwashers and nuts.

Hitch Installation

Figure 22. Sunstar Hitch Installation

A. U-Bracket D. Bracket

B.Capscrew, 1/2-13 x 1-1/4 E. Large Hole

C.Capscrew, 7/16-14 x 1/2 F. Capscrew, 7/16-14 x 1/2

Sovereign/900 Series (Mfg. No. 1691526)

Note: Hitch assembly is packaged with the Turbo Blower

Assembly, Mfg. No. 1692257.

1.Assemble the hitch U-bracket (B, Figure 23) to the support bracket (F) with two 1/2-13 x 1-1/2 cap- screws (G) and locknuts (A).

2.Install hitch bracket assembly to tractor drawbar and secure on sides with 1-3/4 clevis pins (D) and spring clips (1).

Figure 23. Sovereign Hitch Installation

A. Locknut, 1/2-13	F. Support Bracket
B. U-Bracket	G.Capscrew, Hex, 1/2-13x1-1/2
C. Washer, Flat	H.Spacer
D. Safety Clip	I. Spring Clip

E. Clevis Pin, 7/16x1-3/4 J. Clevis Pin, 1/2 x 7/8

Landlord/1700 Series (Mfg. No. 1692526)

1.Assemble the hitch bracket (A, Figure 24) to the hitch support (B) with two 3/8-16 x 1 capscrews (C) and locknuts (D).

2.Position the hitch bracket to the top side of the draw- bar (D) with the hitch support to the backside (F) of the drawbar. Secure the hitch bracket with two 1/2-13 x 1 1/4 capscrews (G), flat washers (H), and locknuts

(I) and the hitch support with two 3/8-16 x 1 cap- screws and locknuts.

F	C
G
C	D
				D
				E
		A	B	G
				H
Figure 24. Landlord Hitch Installation
A. Hitch Bracket		E. Backside Drawbar
B. Hitch Support		F. Capscrew, 1/2-13 x 1-1/4
C. Capscrew, 3/8-16 x 1		G. Flat washer, 1/2
D. Locknut, 3/8-16		H. Locknut, 1/2-13

9