Simplicity Turbo Wide Body Cart & Hitch Connecting Cart / Maintenance, Connecting Cart to Tractor

Page 14

Connecting Cart / Maintenance

CONNECTING CART TO TRACTOR

Place the cart frame (A, Figure 28) onto tractor brackets and install the clevis pins (B) and springs clips (C).

Figure 28. Connecting Cart To Tractor

A. Cart FrameC. Spring Clip

B. Clevis Pin

MAINTENANCE

Cleaning Clear Tube

To clean the clear mid-tube on the SunStar and Sovereign series collection systems, wash with warm water and mild soap or detergent. Use a soft, clean sponge or cloth. DO NOT use abrasive, alkaline, or petroleum based cleaners.

Cover

The cover can be rinsed with a hose when dirty. A dirty cover will inhibit the fast flow of grass clippings into the cover. Do not leave grass or leaves in the cart for a long period of time.

Wheels

Lubricate the wheel assembly before using the cart and as necessary thereafter. A grease fitting is located at swivel base. Use SAE multi-purpose type grease.

Tires

The tire pressure should be 30 psi.

WARNING

The cover is subject to wear and deterioration. Check the cover frequently. Use an approved replacement cover.

WARNING

Before opening the cover for any reason, engage the parking brake, shut off the engine, remove the key, and wait for all moving parts to stop.

12

Image 14
Contents OPERATOR’S Manual Page Table of Contents SpecificationsIllustrations & Part Lists CoverIllustrations & Part Lists Tube Assembly Landlord & Broadmoor Safety Rules Safety RulesCart Assembly Cart AssemblyCover Assembly Cover AssemblyInstall Connecting Sleeve SunStar/1900 Series Mfg. No Hitch InstallationHitch Installation Sovereign/900 Series Mfg. NoHitch Assembly Broadmoor Broadmoor/1600 Series Mfg. NoLandlord/1700 Series Mfg. No Broadmoor/1600 Series Mfg. No Discharge Tube InstallationDischarge Tube Installation SunStar/1900 Series Mfg. No Sovereign/900 Series Mfg. NoMaintenance Connecting Cart / MaintenanceConnecting Cart to Tractor Before Operation OperationOperation During OperationReinstallation After Removal Operating Without Collection SystemHardware Identification & Torque Specifications