KitchenAid W10176789A, KBZU122VSS, KBZU242VSS Gas Supply Requirements, Gas Connection Requirements

Page 10

Recommended Ground Method

The outdoor side burner, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA 70, or Canadian Electrical Code, CSA C22.1.

Copies of the standards listed above may be obtained from:

CSA International

8501 East Pleasant Valley Rd.

Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

B

A

C

A. 3 prong ground plug

B. 3-prong polarized type outdoor GFI outlet

C. Ground prong

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149.1 - latest edition.

IMPORTANT: The side burner must be connected to a regulated gas supply.

Refer to the model/serial rating plate for information on the type of gas that can be used. If this information does not agree with the type of gas available, check with your local gas supplier.

Gas Conversion:

No attempt shall be made to convert the side burner from the gas specified on the model/serial rating plate for use with a different gas type without consulting the serving gas supplier. The conversion kits supplied with the side burner must be used. See “Gas Conversions” section for instructions.

Gas Pressure Regulator

The gas pressure regulator supplied with this side burner must be used. The inlet (supply) pressure to the regulator should be as follows for proper operation:

LP Gas:

Set pressure: 11" (27.9 cm) WCP

Inlet (supply) pressure: 11" to 14" (27.9 cm to 35.5 cm) WCP

Natural Gas:

Set pressure: 4" (10.2 cm) WCP

Inlet (supply) pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP maximum.

Contact local gas supplier if you are not sure about the inlet (supply) pressure.

Burner Requirements for High Altitude

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level. Orifice conversion is required. See “Assistance or Service” section to order.

Gas Supply Line Pressure Testing

Testing above ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge):

The side burner and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures greater than ½ psi (3.5 kPa).

Testing below ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge) or lower:

The side burner must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

Gas Connection Requirements

For Models Equipped for LP Gas

20 lb LP Gas Fuel Tank

This side burner is equipped for use with a 20 lb LP gas fuel tank (fuel tank not supplied). A gas pressure regulator/hose assembly is supplied.

It is also design-certified by CSA International for local LP gas supply or for Natural gas with appropriate conversion.

A

A. Gas pressure regulator/hose assembly

10

Image 10
Contents Outdoor BUILT-IN Dual Side Burners Outdoor BUILT-IN Side Burner Safety Your safety and the safety of others are very importantImportant Safety Instructions Table of Contents Installation Requirements Tools and PartsCabinet Dimensions Product DimensionsLocation Requirements Between a Trash Drawer, Utility Drawer, or Warming Drawer 13½ 34.3 cm 10⁵⁄₈ 27.0 cm 22¹¹⁄₁₆ 57.6 cm Electrical Requirements Built-in Outdoor Grill Enclosure Ventilation for LP GasGas Supply Requirements Gas Connection RequirementsNatural Gas Conversion Local LP Gas Supply ConversionDoor Style Tank Tray Natural Gas LP Gas Conversion Using a Local LP Gas Supply LP Gas Conversion Using a 20 lb LP Gas Fuel TankBuilt-in Outdoor Side Burner Installation Installation InstructionsDimension a Dimension B To Install the 20 lb LP Gas Fuel Tank Make Gas ConnectionGas Connection to Natural Gas or Local LP Gas Plug in Side BurnerAssemble Cooking Area Tools and Parts for Gas Conversion Installation of the regulatorGAS Conversions Conversion to a Local LP Gas SupplyMake Side Burner Connections Connect Local LP Gas Supply Conversion from LP Gas to Natural GasRecord Conversion Change the Side burner orifices Check and Adjust the BurnersHook up to Natural gas and Leak Test Using Your Outdoor Side Burner Lighting Your Side BurnerOutdoor Side Burner Care General CleaningCleaning Method Manually lighting the side burnerIf you need replacement parts TroubleshootingAssistance or Service Nothing will operateU.S.A Kitchenaid Outdoor Product WarrantyAccessories CanadaDisclaimer of Implied Warranties Limitation of Remedies Sécurité DU Brûleur Latéral Encastré Dextérieur Votre sécurité et celle des autres est très importanteConservez CES Instructions Modèles à gaz naturel Outillage nécessaire Exigences DinstallationOutillage et pièces Pièces fourniesDimensions du placard Exigences demplacementDimensions du produit AllumageTiroir Dimension C Dimension D Dimension E Taille de la porte Dimension F Dimension LSpécifications électriques Détendeur Méthode recommandée de mise à la terreSpécifications de lalimentation en gaz Puissance thermique des brûleurs en altitudeAlimentation par bouteille de propane de 20 lb Exigences concernant le raccordement au gazChariot de la bouteille Conversion pour lalimentation au gaz naturel Gaz naturelInstructions ’INSTALLATION Installation du brûleur latéral dextérieur EncastréRaccordement de gaz Raccordement à une bouteille de gaz propane de 20 lbInstallation de la bouteille de propane de 20 lb Alimentation au gaz naturel ou au gaz propane localBranchement du brûleur latéral Prise à une brocheConversions DE GAZ Installation de la zone de cuissonOutils nécessaires Conversion au gaz propane local Installation du détendeurEnregistrer la conversion Remplacement des gicleurs du brûleur latéral Conversion de gaz propane à Gaz naturelEnregistrement de la conversion Contrôle et réglage des brûleursRaccordement au gaz naturel et recherche des fuites Réglage pour le débit thermique minimumPréparation de l’alimentation en gaz Utilisation DU Brûleur Latéral DextérieurAllumage du brûleur latéral Ouvrir larrivée de gazAllumage manuel du brûleur latéral Entretien DU Brûleur Latéral DextérieurNettoyage général Méthode de nettoyageDépannage Rien ne fonctionneAccessoires Assistance OU ServiceAu Canada Garantie DES Produits Pour Usage Extérieur Kitchenaid La présente garantie limitée ne couvre pasW10176789A All rights reserved Tous droits réservés
Related manuals
Manual 48 pages 30.32 Kb

W10176789A, KBZU122TSS, KBZU122VSS, KBZU242VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.