KitchenAid KBZU122TSS, KBZU122VSS Local LP Gas Supply Conversion, Natural Gas Conversion

Page 11

The 20 lb LP gas fuel tank must be mounted and secured.

Door Style Tank Tray

1.Open cabinet doors.

2.Pull out the tank tray.

Tank tray

3.Place the 20 lb LP gas fuel tank bottom collar into the mounting hole in the tank tray.

4.Tighten the locking screw against the bottom collar of the 20 lb LP gas fuel tank to secure.

A

BC

A.Locking screw

B.Mounting hole

C.Bottom collar

5.Slide tank tray back into the cabinet.

6.Close cabinet doors.

Local LP Gas Supply Conversion

Conversion must be made by a qualified gas technician. The qualified gas technician shall provide the gas supply to the selected side burner location in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition, and local codes. For conversion to local LP, the convertible regulator in the conversion kit supplied with the side burner must be used.

IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 - latest edition. The qualified LP gas technician shall provide the LP gas supply to the selected side burner location in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 and local codes.

Follow instructions for converting to local LP gas in the “Gas Conversions” section.

A

B

C

A. New CSA International approved “outdoor” flexible gas supply line

B. Rear of side burner C. To local LP gas supply

The gas supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the side burner and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the side burner.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To side burner

Natural Gas Conversion

Conversion must be made by a qualified gas technician. The qualified Natural gas technician shall provide the Natural gas supply to the selected side burner location in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition, and local codes. For conversion to Natural gas, the Natural gas conversion kit supplied with the side burner must be used.

IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 - latest edition.

To convert to Natural gas, the Natural Gas Conversion Kit supplied with the side burner must be used. Follow instructions for converting to Natural gas in the “Gas Conversions” section.

A

B

C

A. New CSA International approved “outdoor” flexible gas supply line

B. Rear of side burner C. To Natural gas supply

The gas supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the side burner and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the side burner.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To side burner

11

Image 11
Contents Outdoor BUILT-IN Dual Side Burners Your safety and the safety of others are very important Outdoor BUILT-IN Side Burner SafetyImportant Safety Instructions Table of Contents Tools and Parts Installation RequirementsLocation Requirements Product DimensionsCabinet Dimensions Between a Trash Drawer, Utility Drawer, or Warming Drawer 13½ 34.3 cm 10⁵⁄₈ 27.0 cm 22¹¹⁄₁₆ 57.6 cm Built-in Outdoor Grill Enclosure Ventilation for LP Gas Electrical RequirementsGas Connection Requirements Gas Supply RequirementsDoor Style Tank Tray Local LP Gas Supply ConversionNatural Gas Conversion LP Gas Conversion Using a 20 lb LP Gas Fuel Tank Natural Gas LP Gas Conversion Using a Local LP Gas SupplyDimension a Dimension B Installation InstructionsBuilt-in Outdoor Side Burner Installation Make Gas Connection To Install the 20 lb LP Gas Fuel TankPlug in Side Burner Gas Connection to Natural Gas or Local LP GasAssemble Cooking Area Conversion to a Local LP Gas Supply Installation of the regulatorGAS Conversions Tools and Parts for Gas ConversionRecord Conversion Conversion from LP Gas to Natural GasMake Side Burner Connections Connect Local LP Gas Supply Hook up to Natural gas and Leak Test Check and Adjust the BurnersChange the Side burner orifices Lighting Your Side Burner Using Your Outdoor Side BurnerManually lighting the side burner General CleaningCleaning Method Outdoor Side Burner CareNothing will operate TroubleshootingAssistance or Service If you need replacement partsCanada Kitchenaid Outdoor Product WarrantyAccessories U.S.ADisclaimer of Implied Warranties Limitation of Remedies Votre sécurité et celle des autres est très importante Sécurité DU Brûleur Latéral Encastré DextérieurConservez CES Instructions Pièces fournies Exigences DinstallationOutillage et pièces Modèles à gaz naturel Outillage nécessaireAllumage Exigences demplacementDimensions du produit Dimensions du placardTiroir Taille de la porte Dimension F Dimension L Dimension C Dimension D Dimension ESpécifications électriques Puissance thermique des brûleurs en altitude Méthode recommandée de mise à la terreSpécifications de lalimentation en gaz DétendeurChariot de la bouteille Exigences concernant le raccordement au gazAlimentation par bouteille de propane de 20 lb Gaz naturel Conversion pour lalimentation au gaz naturelInstallation du brûleur latéral dextérieur Encastré Instructions ’INSTALLATIONRaccordement à une bouteille de gaz propane de 20 lb Raccordement de gazAlimentation au gaz naturel ou au gaz propane local Installation de la bouteille de propane de 20 lbPrise à une broche Branchement du brûleur latéralOutils nécessaires Installation de la zone de cuissonConversions DE GAZ Enregistrer la conversion Installation du détendeurConversion au gaz propane local Conversion de gaz propane à Gaz naturel Remplacement des gicleurs du brûleur latéralRéglage pour le débit thermique minimum Contrôle et réglage des brûleursRaccordement au gaz naturel et recherche des fuites Enregistrement de la conversionOuvrir larrivée de gaz Utilisation DU Brûleur Latéral DextérieurAllumage du brûleur latéral Préparation de l’alimentation en gazMéthode de nettoyage Entretien DU Brûleur Latéral DextérieurNettoyage général Allumage manuel du brûleur latéralRien ne fonctionne DépannageAu Canada Assistance OU ServiceAccessoires La présente garantie limitée ne couvre pas Garantie DES Produits Pour Usage Extérieur KitchenaidAll rights reserved Tous droits réservés W10176789A
Related manuals
Manual 48 pages 30.32 Kb

W10176789A, KBZU122TSS, KBZU122VSS, KBZU242VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.