KitchenAid KBZU242VSS, KBZU122VSS, W10176789A, KBZU122TSS Electrical Requirements

Page 9

Cutout Dimensions - Built-in Warming Drawer

Warming Drawer Size

Dimension J

 

 

 

 

24" (61.0 cm)

22½" (57.2 cm)

 

 

 

 

 

 

Cutout Dimensions - Built-in Utility Drawer and Built-in Trash Drawer

 

 

 

 

Dimension M

Dimension L*

 

 

 

 

12¼" (31.1 cm)

1½" (3.8 cm)

 

 

 

*Dimension L is the minimum mounting surface area around the opening for mounting the optional door or drawers.

Built-in Outdoor Grill Enclosure Ventilation for LP Gas:

An enclosure for an LP gas fuel tank is to be ventilated by openings at both the top and lower levels of the enclosure.

If converting to LP gas these vents are to be in the enclosure:

An enclosure for use with an LP gas fuel tank for built-in installation is to have at least one ventilation opening on an exposed exterior side located within 5" (12.7 cm) of the top is to be a minimum of 20 in.2 (129.0 cm2). One ventilation opening within 1" (2.5 cm) of the bottom of the enclosure and the bottom opening is to be a minimum of 10 in.2 (64.5 cm2). All vent openings are to be unobstructed. Every opening is to be a minimum of ¹⁄₈" (0.32 cm) wide.

20 in.2 (129.0 cm2) min. ventilation both sides

1" (2.5 cm) max.

10 in.2 (64.5 cm2) min. ventilation both sides

5" (12.7 cm) max.

5" (12.7 cm) max.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure whether the side burner is properly grounded.

A120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is required.

It is recommended that a separate circuit servicing only this side burner be provided.

Do not operate any outdoor cooking gas appliance with a damaged cord, damaged plug, or after the appliance malfunctions or has been damaged in any manner. Contact the manufacturer for repair.

Do not let the cord hang over the edge of a table or touch hot surfaces.

Do not use an outdoor cooking appliance for purposes other than intended.

When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.

Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.

Do not remove the ground prong or use with an adapter of 2 prongs.

The model/serial number rating plate is located on the right-hand side panel. See the following illustration.

A

A. Model/serial number plate

To avoid electrical shock, do not immerse cord or plugs in water or other liquid.

Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

9

Image 9
Contents Outdoor BUILT-IN Dual Side Burners Your safety and the safety of others are very important Outdoor BUILT-IN Side Burner SafetyImportant Safety Instructions Table of Contents Tools and Parts Installation RequirementsProduct Dimensions Cabinet DimensionsLocation Requirements Between a Trash Drawer, Utility Drawer, or Warming Drawer 13½ 34.3 cm 10⁵⁄₈ 27.0 cm 22¹¹⁄₁₆ 57.6 cm Built-in Outdoor Grill Enclosure Ventilation for LP Gas Electrical RequirementsGas Connection Requirements Gas Supply RequirementsLocal LP Gas Supply Conversion Natural Gas ConversionDoor Style Tank Tray LP Gas Conversion Using a 20 lb LP Gas Fuel Tank Natural Gas LP Gas Conversion Using a Local LP Gas SupplyInstallation Instructions Built-in Outdoor Side Burner InstallationDimension a Dimension B Make Gas Connection To Install the 20 lb LP Gas Fuel TankPlug in Side Burner Gas Connection to Natural Gas or Local LP GasAssemble Cooking Area GAS Conversions Installation of the regulatorTools and Parts for Gas Conversion Conversion to a Local LP Gas SupplyConversion from LP Gas to Natural Gas Make Side Burner Connections Connect Local LP Gas SupplyRecord Conversion Check and Adjust the Burners Change the Side burner orificesHook up to Natural gas and Leak Test Lighting Your Side Burner Using Your Outdoor Side BurnerCleaning Method General CleaningOutdoor Side Burner Care Manually lighting the side burnerAssistance or Service TroubleshootingIf you need replacement parts Nothing will operateAccessories Kitchenaid Outdoor Product WarrantyU.S.A CanadaDisclaimer of Implied Warranties Limitation of Remedies Votre sécurité et celle des autres est très importante Sécurité DU Brûleur Latéral Encastré DextérieurConservez CES Instructions Outillage et pièces Exigences DinstallationModèles à gaz naturel Outillage nécessaire Pièces fourniesDimensions du produit Exigences demplacementDimensions du placard AllumageTiroir Taille de la porte Dimension F Dimension L Dimension C Dimension D Dimension ESpécifications électriques Spécifications de lalimentation en gaz Méthode recommandée de mise à la terreDétendeur Puissance thermique des brûleurs en altitudeExigences concernant le raccordement au gaz Alimentation par bouteille de propane de 20 lbChariot de la bouteille Gaz naturel Conversion pour lalimentation au gaz naturelInstallation du brûleur latéral dextérieur Encastré Instructions ’INSTALLATIONRaccordement à une bouteille de gaz propane de 20 lb Raccordement de gazAlimentation au gaz naturel ou au gaz propane local Installation de la bouteille de propane de 20 lbPrise à une broche Branchement du brûleur latéralInstallation de la zone de cuisson Conversions DE GAZOutils nécessaires Installation du détendeur Conversion au gaz propane localEnregistrer la conversion Conversion de gaz propane à Gaz naturel Remplacement des gicleurs du brûleur latéralRaccordement au gaz naturel et recherche des fuites Contrôle et réglage des brûleursEnregistrement de la conversion Réglage pour le débit thermique minimumAllumage du brûleur latéral Utilisation DU Brûleur Latéral DextérieurPréparation de l’alimentation en gaz Ouvrir larrivée de gazNettoyage général Entretien DU Brûleur Latéral DextérieurAllumage manuel du brûleur latéral Méthode de nettoyageRien ne fonctionne DépannageAssistance OU Service AccessoiresAu Canada La présente garantie limitée ne couvre pas Garantie DES Produits Pour Usage Extérieur KitchenaidAll rights reserved Tous droits réservés W10176789A
Related manuals
Manual 48 pages 30.32 Kb

W10176789A, KBZU122TSS, KBZU122VSS, KBZU242VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.