8
HOOD
FIGURE 12
HOOD
CURTAIN
MESH
LOGO PLACEMENT
R e m o v e | t h e |
backing of | the |
logo supplied and place on the screen cover, as indicated.
FIGURE 14
LOUVRE INSTALLATION
The curtain mesh must be kept fully closed during operation to help prevent accidental burns from occurring.
FIGURE 13
The heater must not be used when the hood is re- moved. Hook the hood over the lip of the curtain support plate.
FIGURE 15a-c
HOOD
BRACKET
SLOT
ALOUVRE
BLOWER LOUVRES (VALVE CONTROL DOOR)
HINGE SCREEN
C
UPPER LOUVRES: Insert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
LOWER LOUVRES: At- tach each hinge to the firebox with 2 screws.
HINGE SCREEN: Position the hinge screen into place and with the control door open, secure to the firebox using three screws.