Panasonic TX-86PW300A, TX-76PW300A CH Search, Direct Programme Number Selection

Remote Control Television Operation

BUTTON WHAT IT DOES

CH SEARCH

This option is used to show freeze frames of the programmes being broadcast on all the stored channels. The images are displayed clockwise around the edge of the screen starting from the top left corner. The current programme is displayed in the centre of the screen. When the display gets back to the top left corner it will overwrite the first picture with the next one in series.

The display will continue to change until any button is pressed

The Red button is used to select each programme in turn. The green button is used to swap the main display between the current programme and the one selected by the red button. The Blue button returns to normal viewing.

1	2		3	4
5	6
SELECT		OK		EXIT

RED GREEN YELLOW BLUE

SELECT OK EXIT

Notes: Skipped channels are not shown.

When all the programmed channels have been displayed, the televi- sion will restart the display starting from the top left corner.

DIRECT PROGRAMME NUMBER SELECTION

Single Digit Programme Numbers (0 to 9) can be accessed directly by pressing the corresponding number on the Remote Control Transmitter.

TWO DIGIT PROGRAMME NUMBER SELECTION

To directly access Programme Numbers 10 to 99, press the “- / - -” Button fol- lowed by the two digits required. For example, to select Programme Number 12:

The On-Screen display will be as shown:

_ _ 1_ 12

Please refer to drawing on Page 8 for location of Remote Control Buttons.

13