Panasonic TX-86PW300A, TX-76PW300A Recall, Normalisation, Changing channels in Multi PIP mode

Remote Control Television Operation

BUTTON WHAT IT DOES

PIP (Picture In Picture) Mode

Allows a small picture to be viewed inside the main picture.

Pressing the Red button will switch to the PIP. The Yellow button will switch to the PAP mode. The Blue button swaps the position of the two pictures.

POP (Picture Out Of Picture) Mode

Allows two pictures to be viewed at the same time. The pictures will be shown side by side. The main picture is larger

Pressing the Red button will switch to the PAP. The Yellow button will switch to the PIP mode. The Blue button swaps the position of the two pictures.

PAP (Picture And Picture) Mode

Allows two equal sized pictures to be viewed at the same time. The pictures will be shown side by side.

Pressing the Red button will switch to the PIP. The Yellow button will switch to the POP mode. The Blue button swaps the position of the two pictures.

28 AV1

POP	PAP	CHANGE
28		AV1

PAP	PIP	CHANGE
28		AV1

PIP POP CHANGE

Changing channels in MULTI PIP mode

When the On-Screen display (coloured boxes) is ON, the sub picture can be changed. Use the normal TV/AV button to switch between each of the 5 AV inputs and the RF input.

When the On-Screen display (coloured boxes) is OFF, the main picture can be changed. Use the normal programme or AV select buttons.

RECALL

Pressing this button will display all current active functions. The functions that can be displayed include AV Number, Programme Number, Colour system, Sound Option, Picture Option, Stereo or Mono and Off-Timer setting. Pressing the button again cancels the recall function and removes the text being displayed on the screen.

If the button is not pressed within about 2 seconds it automatically switches to display the Programme Number or the AV Number and the Off-Timer setting. Pressing the button again cancels the recall function and removes the text being

displayed on the screen.

NORMALISATION

The Normalisation Button is used to reset the television to factory set levels. Colour, Sharpness, Contrast, Brightness, Treble, Bass and Balance will be reset. The button will only operate if the menu is displayed on the screen.

STR

The STR (Store) button is used with a number of features to store settings after adjustments have been made or options have been set. It is also used in TELETEXT and tuning functions.

Please refer to drawing on Page 8 for location of Remote Control Buttons.

11