Safety Information Product Identification

SAFETY INFORMATION PRODUCT IDENTIFICATION LOCAL CODES

SAFETY INFORMATION

PRODUCT IDENTIFICATION

Continued

5.	This ﬁreplace reaches high temperatures. Keep children and
	adults away from hot surfaces to avoid burns or clothing igni-
	tion. Fireplace will remain hot for a time after shutdown. Allow
	surfaces to cool before touching.
6.	Carefully supervise young children when they are in the room
	with ﬁreplace.
7.	Do not modify this ﬁreplace under any circumstances. Any
	parts removed for servicing must be replaced prior to operating
	ﬁreplace.
8.	Turn ﬁreplace off and let cool before servicing, installing or
	repairing. Only a qualiﬁed service person should install, service
	or repair this ﬁreplace. Have ﬁreplace inspected annually by a
	qualiﬁed service person.
9.	You must keep control compartments, burners and circulating
	air passages clean. More frequent cleaning may be needed due
	to excessive lint and dust from carpeting, bedding material, etc.
	Turn off the gas valve and pilot light before cleaning ﬁreplace.
10.	Have venting system inspected annually by a qualiﬁed service
	person. If needed, have venting system cleaned or repaired. See
	Cleaning and Maintenance, page 25.
11.	Keep the area around your ﬁreplace clear of combustible ma-
	terials, gasoline and other ﬂammable vapor and liquids. Do
	not run ﬁreplace where these are used or stored. Do not place
	items such as clothing or decorations on or around ﬁreplace.
12.	Do not use this ﬁreplace to cook food or burn paper or other

Upper Louver

Panel

Nailing

Flange

Glass

Door

Assembly

Lower

Louver

Panel

Electronic	Glowing
Control Valve	Embers

Flue Collar

Log

Set

Lava

Rock

	Burner	Switch Bracket for
	Assembly	Switch Bracket for
	Assembly	Optional Remote and
		Optional Remote and
		Blower

	objects.
13.	Do not use any solid fuels (wood, coal, paper, cardboard, etc.)
	in this ﬁreplace. Use only the gas type indicated on ﬁreplace
	nameplate.
14.	This appliance, when installed, must be electrically grounded
	in accordance with local codes or, in the absence of local
	codes, with the National Electrical Code, ANSI/NFPA 70 or
	the Canadian Electrical Code, CSA C22.1.
15.	Do not use ﬁreplace if any part has been exposed to or under
	water. Immediately call a qualiﬁed service person to arrange
	for replacement of the unit.
16.	Do not operate ﬁreplace if any log is broken.
17.	Do not use a blower insert, heat exchanger insert or other ac-
	cessory not approved for use with this ﬁreplace.
18.	Do not operate ﬁreplace with glass door removed, cracked or
	broken.
19.	Provide adequate clearances around air openings.

Figure 1 - Direct-Vent Fireplace with Electronic Ignition

LOCAL CODES

Install and use ﬁreplace with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANSI Z223.1/NFPA 54* (USA) or the current CSA-B149.1 Instal- lation Code (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

116237-01C