OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Top Louver
Panel
Nailing
Flange
Magnetic
Brass Trim
Glass Door
Assembly
Magnetic
Brass Trim
Blower Adjustment (Optional Installation)
ON/OFF/
Remote Switch
Piezo Ignitor
Valve
Lower Louver Panel
Glowing Embers
Front Burner
Vent Opening
Standoff
Rear
Burner
Log Set
Pilot
Assembly
Lava Rock
Grate
Assembly
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANS Z223.1, also known as NFPA 54* (USA) or the current
.2] Installation Codes (Canada).
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT
FEATURES
OPERATION
This
PIEZO IGNITOR
This fireplace has a piezo ignitor. This sys- tem requires no matches, batteries, or other
Figure 1 - Comfort Glow Direct-Vent Fireplace HDV Series
sources to light fireplace.
GLOSSARY OF
TERMS
Chase - A boxlike enclosure to protect venting from the elements when the venting run is on the outside of a structure.
Mastic - A pliable sealant for use around the vent terminal.
Snorkel Termination - A box that raises the horizontal termination above ground level clearances.
Vent Terminal - Mounted on an outside wall or roof to separate the inlet and outlet of the vent system and protect it from weather.
Vinyl Siding Standoff - A metal box that separates the vent cap from vinyl siding.
Wall Thimble/Firestop - A metal plate used to secure the vent pipe when it passes through a wall or ceiling.
105542 | 3 |