Desa LCF24, LCF18 installation manual Gas leak. See Warning

Page 15

TROUBLESHOOTING

Continued

WARNING: If you smell gas

Shut off gas supply.

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Fol- low the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

IMPORTANT: Operating log set where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors. These odors will disappear over time.

OBSERVED PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

 

 

Log Set produces a clicking/tick-

1.

Metal expanding while heating

1.

This is common with most log

ing noise just after burner is lit

 

or contracting while cooling

 

sets. If noise is excessive, con-

or shut off

 

 

 

tact qualified service person

 

 

 

 

 

Log Set produces unwanted

1.

Log Set burning vapors from

1.

Open flue to maximum. Stop

odors

 

paint, hair spray, glues, clean-

 

using odor causing products

 

 

ers, chemicals, new carpet,

 

while log set is running

 

 

etc. (See IMPORTANT state-

 

 

 

 

ment above)

 

 

 

2.

Gas leak. See Warning

2.

Locate and correct all leaks

 

 

statement at top of page

 

(see Checking Gas Connec-

 

 

 

 

tions, page 7)

 

 

 

 

 

Gas odor even when control knob

1.

Gas leak. See Warning

1.

Locate and correct all leaks

is in OFF position

 

statement at top of page

 

(see Checking Gas Connec-

 

2.

Control valve defective

 

tions, page 7)

 

2.

Replace control valve

 

 

 

 

 

Gas odor during combustion

1.

Gas leak. See Warning

1.

Locate and correct all leaks

 

 

statement at top of page

 

(see Checking Gas Connec-

 

 

 

 

tions, page 7)

115043-01C

www.desatech.com

15

Image 15
Contents Models LCF18 and LCF24 BrentwoodTable of Contents Safety Information Local Codes Product IdentificationOptional Product Features UnpackinginstallationConnecting to GAS Supply InstallationVenting Specifications for Installation Installing Damper ClampTest Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS ConnectionsHearth KIT Assembly and Installation Installation and Gas ConnectionTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Adding PAN Material Optional GA9050A ON/OFF Safety VALVE/PILOT KITTesting Burner for Leaks Installing the Grate and LogsLighting Instructions For Your Safety Read Before LightingFlame Adjustment Operating ApplianceCuring Logs Operating Instructions For GA9050AShutting Off Appliance Replacement Parts Cleaning MaintenanceService Hints Technical ServiceObserved Problem Possible Cause Remedy TroubleshootingWhen ignitor button is pressed Gas leak. See Warning Illustrated Parts Breakdown Parts List Equipment Shutoff Valve GA5010 AccessoriesReceiver and HAND-HELD ON/OFF Remote Control KIT HRC101 Manual Control ON/OFF Safety VALVE/PILOT KIT GA9050A115043-01C Warranty Information Keep this WarrantyLimited Warranty Vented GAS Logs

LCF24, LCF18 specifications

Desa LCF18 and LCF24 are cutting-edge technology solutions designed for efficient and sustainable practices in various industries. These models stand out due to their advanced features, technologies, and unique characteristics that cater to modern demands in production and operations.

The LCF18 is known for its compact design and high efficiency. This model is engineered for optimal energy consumption while maintaining performance. It features a smart control system that allows users to monitor and adjust operations in real time, leading to improved productivity and reduced wastage. The energy-efficient motors in the LCF18 adapt to varying loads, ensuring that users only consume the necessary amount of power. Additionally, the LCF18 is equipped with state-of-the-art safety mechanisms, minimizing risks and ensuring a secure working environment.

On the other hand, the LCF24 is larger and offers increased capacity without sacrificing efficiency. Designed for heavy-duty applications, the LCF24 integrates a robust framework with advanced material technology that guarantees durability and reliability under the most demanding conditions. Its programmable logic controller (PLC) enhances automation, enabling users to implement complex operations with ease. The LCF24 model also incorporates a sophisticated diagnostic system that provides real-time feedback on performance, allowing for predictive maintenance that reduces downtime.

Both models utilize sustainable technologies to minimize environmental impact. They are compliant with international standards for emissions and energy use, making them suitable choices for companies striving for greener production methods. The incorporation of IoT technology in both the LCF18 and LCF24 models allows for remote monitoring and data analytics, facilitating informed decision-making that promotes efficiency.

The versatility of the Desa LCF18 and LCF24 is another noteworthy characteristic. These models can be adapted for various applications, from manufacturing to processing, making them valuable assets in numerous sectors. Their ease of integration with existing systems ensures that businesses can upgrade their operations seamlessly without significant disruptions.

In summary, Desa LCF18 and LCF24 represent the fusion of innovation and practicality in modern industrial solutions. Their energy efficiency, intelligent technology, safety features, and adaptability position them as leaders in the field, addressing the evolving needs of industries while promoting sustainability and operational excellence.