INSTALLATION
Log Placement for P325E/VP325E Models
13
INSTALLATION
Continued
LOG PLACEMENT FOR P325E(B)/VP325E(B)
MODLES
1.Place large back log (log 1) onto grate making sure notches rest over grate (see Figure 25).
2.Place log 2 onto front right side of grate and back of log 2 into notch on right front of log 1 (see Figure 25).
3.Rest front of log 3 between first two grate fingers on left of grate assembly and rear of log 3 into notch on left front oflog 1(see Figure 26).
Log 1
Log 2
Figure 25 - Installing Logs 1 and 2
Log 3
Log 1
Figure 26 - Installing Log 3
4.Place top of log 4 into notch on log 1. Rest log 4 on the center of grate as shown in Figure 27.
5.Place top of log 5 into notch on top right of log 1 (see Figure 27). Rest log 5 between two middle grate fingers as shown in Figure 28
To enhance the look of the hearth you may optionally place the lava rock provided around the front and sides of the burner.
NOTICE: Do not put lava rock inside the burner pan or around the air mixer fitting. Placing lava rock inside the burner pan or blocking the openings of the propane/LP
Log 5
Log 4
Log 3
Log 1
Figure 27 - Installing Logs 4 and 5
Figure 28 - Logs Installed
For more information, visit www.desatech.com