PRODUCT SPECIFICATIONS SELECTING LOCATION
5
PRODUCT SPECIFICATIONS
| 22 3/8" |
|
| 21 1/2" |
|
|
| * 20 3/8" | |
| 7" | 14 | 1/2" | HEARTH AREA |
| 16 3/4" | * 13 3/4" | ||
|
| 11 3/4" | DIMENSIONS | |
5/8" | 34 1/2" |
|
| * 27 1/2" |
7" |
|
| 29" | |
| Alternate Gas |
| ||
|
|
| ||
|
|
| * WITH REFRACTORY | |
|
| Supply Inlet |
|
|
| 7" |
|
|
|
|
|
8 1/8" | 18 1/4" | 32 1/4" |
|
|
| 36 1/2" | |
10 1/2" |
|
| 8 1/4" |
|
| 6 7/8" |
|
8 1/4" | 1/2" | 7" |
|
|
|
| |
2 | 29 1/2" |
|
|
|
|
| |
8 3/8" |
| 2 1/2" | 5/8" | 2 1/4" | |||
| 35 3/8" | 7 | |||||
13 1/4" |
|
| 10 | 5 | /8" |
| |
|
|
|
|
| |||
|
|
|
|
| 16 3/4" |
| |
Figure 1 - Appliance Dimensions
SELECTING LOCATION
To determine the safest and most efficient location for your appli- ance, you must take into consideration the following guidelines:
1.The location must allow for proper clearances (see Clear- ances, page 6).
2.Consider a location where heat output would not be affected by drafts, air conditioning ducts, windows, or doors.
3.A location that avoids the cutting of joists or roof rafters will make installation easier. Figure 2 shows a plan view of a few common locations.
Flush installations are recommended where living space is limited or at a premium, and since the space required to enclose the appliance would be located beyond an outside wall, this would also reduce the cutting of joists, roof rafters, and such. Check local codes for any restrictions.
Projected installations can extend any distance into the room. A projection may be ideal for a new addition on an existing, finished wall.
Corner installations make use of space that may not normally be used and provides a wider and more efficient range for radiant heat transference.
Internal wall installations provide a discreet option for room separation and can also be ideal as an addition to an existing wall.
CORNER
INTERNAL WALLINSTALLATION
INSTALLATION
FLUSH
FULLINSTALLATION
PROJECTION
INSTALLATION
Figure 2 - Possible Locations for Installing Appliance
For more information, visit www.desatech.com