Desa VVSR18 Product Identification Optional Product Features, Local Codes Unpacking

Page 3

OWNER’S MANUAL

PRODUCT IDENTIFICATION

OPTIONAL PRODUCT FEATURES

Grate

Burner

Pan

Burner

Clamp

Burner

Manifold

Figure 1 - Product Identification (VVDR24 Shown)

Grate Steps

Burner Inlet

Fitting

ON/OFF SAFETY VALVE/ PILOT KIT AND PROPANE/LP CONVERSION

An optional valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches, batteries, or other sources to light. You must use this optional system for LP conversion. See Ac- cessories, page 20.

REMOTE CONTROL READY (MILLIVOLT) SAFETY VALVE/ PILOT KIT

An optional millivolt valve/safety pilot kit with a piezo ignitor is available for this appliance. This system requires no matches, batteries, or other sources to light. This system may be connected to a wall switch or hand-held wireless remote control. See Ac- cessories, page 20.

Hearth Kit Model ______________________________________

Serial Number ________________________________________

Log Set Model ________________________________________

LOCAL CODES

UNPACKING

REMOTE CONTROL

ACCESSORIES

There is an optional hand-held ON/OFF remote control that can be purchased sepa- rately for this log set. You must use the millivolt valve/safety pilot kit to use remote accessories with this appliance. See Acces- sories, page 20.

Install and use log set with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

CAUTION: Do not remove the metal data plates from the burner pan. The data plates contain im- portant product information.

1.Remove logs, hearth kit, pan materials, and hardware from carton.

2.Remove all protective packaging ap- plied to logs and base for shipment.

3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought the product.

A wall switch is also available for this appliance. You must use the millivolt valve/ safety pilot kit to use the wall switch with this appliance. See Accessories, page 20.

901265

3

Image 3
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASFor Use with Log Sets Vented Natural GAS Logs Safety InformationRemote Control Accessories Product Identification Optional Product FeaturesON/OFF Safety VALVE/ Pilot KIT and PROPANE/LP Conversion Remote Control Ready Millivolt Safety VALVE/ Pilot KITConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionAIR for Combustion Ventilation Determining FRESH-AIR Flow for Appliance LocationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside BuildingCheck GAS Type InstallationFlue Opening Specifications Venting Specifications for InstallationPressure Testing Gas Supply Piping System Installing Damper ClampConnecting to GAS Supply Installation Items NeededInstallation and Gas Connection Hearth KIT Assembly and InstallationOptional GA9000 ON/OFF Safety VALVE/PILOT KIT Assembly Kit AssemblyBurner Inlet Fitting Propane/LP Gas ConversionChanging Pilot Orifice Testing Burner for LeaksInstalling the Grate and Logs Adding PAN MaterialOperating Appliance Troubleshooting To Turn OFF GAS To ApplianceShutting Off Burner Only pilot stays lit Clean pilot see Cleaning and Mainte Gas leak. See Warning statement at TopVVSR18, VVSR24, VVDR18, VVDR24, and VVDR30 Illustrated Parts BreakdownVVSR18 VVSR24, VVDR18 VVDR24, and VVDR30 Parts ListLOG SET Models VSLR18, VSLR24, VDLCR18, VDLCR24, and VDLCR30 Parts List Cleaning and Maintenance Replacement PartsAccessories Ornamental Grate Enhancer GA9330 Decorative ASH BED Control Cover DabkOrnamental Grate Enhancer GA9310 Ornamental Grate Enhancer GA9320Vented Natural GAS Logs 901265 International Warranty Information