Desa VSGF36NRA, VSGF36NTA, VSGF36PRA ON/OFF Series Model HRC100, Thermostat Series Model HRC200

OPERATING FIREPLACE

		Continued
		Flame Adjustment Knob
					OL
	REMOTE		N
	OFF
			O		O
	ON		T	F
			O	F	HI
			LIP
Selector Switch in Remote			Control Knob
Position (Optional Hand-
			in On Position
Held Remote Control)

Indicator Light

Locks System to Prevent Accidental Ignition

Turns

Burners

On or Off

Digital Display Shows Temperature and Settings

			Turns
	AUTO		Hand-Held
ROOM		SET	Remote On
TEMP		TEMP
LOCK		POWER	or Off and
	TEMP		Allows You
			to Choose
MANU		AUTO	the Manual
	ºC/ºF		Setting

Figure 32 - Setting the Selector Switch, Control Knob and Flame Adjustment Knob for Hand-Held Remote Operation

ON/OFF SERIES (MODEL HRC100)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 33). TO LOCK press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed. TO UNLOCK press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control Button Turns

Burners On and Off

Figure 33 - On/Off Hand-Held Remote Control Unit (HRC100)

THERMOSTAT SERIES (MODEL HRC200)

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 34). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1.Press the POWER and LOCK buttons togeth- er to turn on the hand-held remote control.

2.Press the MANU button to turn on the fireplace.

3.Press the POWER and LOCK buttons together to turn off the fireplace.

	Selects
Increases or Decreases	AUTO Mode
Room Temperature in	°C/°F Mode
AUTO Mode
	Button
Figure 34 - Thermostat Hand-Held
Remote Control Unit (HRC200)
Auto (Thermostatic) Mode

1.Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2.Press AUTO button to select this mode.

3.Set the desired room temperature by press- ing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons together to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace. Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Safety Features When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

116746-01A www.desatech.com 23