Vermont Casting Safety Information, Description, Precautions, Drafts, EWF30 Listed, 20008662

Page 3
Safety Information

Vermont Castings EWF30

Safety Information

Please Read This Manual Before Installing and Using Fireplace

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible fire hazard and will void the warranty.

Description

The EWF30 fireplace is a clean burning, non-catalytic, EPA certified solid fuel, wood burning, heat circulating fireplace.

Precautions

CFM Specialty Home Products fireplaces and com- ponent parts have been highly tested and will operate safely when installed in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your CFM Spe- cialty Home Products dealer.

Only use CFM Specialty Home Products components or the warranty will be voided and a fire hazard may be created.

CFM Specialty Home Products warranty will be voided by and CFM Specialty Home Products disclaims any responsibility for the following actions:

•Installation of any damaged fireplace or chim- ney component;

•Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in CFM Corporation Chimney Top installation instructions).

•Installation other than as instructed by CFM Specialty Home Products; or

•Installation and/or use of any component part not manufactured or approved by CFM Specialty Home Products in combination or assembly with a CFM Specialty Home Prod- ucts fireplace system, notwithstanding any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

This fireplace and chimney system must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the black fireplace surround.

Burn only solid wood fuel.

The EWF30 is intended for operation with the doors closed or fully open only with the optional spark screen in place. The doors must be in the fully closed position for clean burning operation.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

This fireplace is not approved for installation in mobile homes.

NOTE: Hairline cracks in hearth brick and ash lips are not a safety issue and do not need to be re- placed.

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

EWF30

Listed

UL 127 / ULC-S610
Standard for Factory Built Fireplaces

Unit: WFE05H0

20008662

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Do Not Discard This Manual Retain for Future Use EWF30 FireplaceCFM Specialty Home Products Homeowner’s Installation and Operating ManualSave These Instructions for Future Reference Table of ContentsIntroduction Vermont Castings EWF30Drafts Safety InformationPrecautions DescriptionVermont Castings EWF30 SpecificationsEWF30 EWF30 Woodburning FireplaceChase Installation Vermont Castings EWF3020008662 Vermont Castings EWF30 30˚ Elbow OffsetsIllustration Key Chimney Requirements - Offset InstallationsThe Ten Foot Rule Planning InformationMounting the Fireplace Planning the Chimney RunInsulating Fireplace Enclosure for Cold Climates InstallationChase Installation Chimney SupportsEB1 Receptacle Hookup Straight-UpChimney InstallationOffset Installation FramingFraming the Ceiling Hole Positioning, Safety Strips Securing the FireplaceCeiling Chimney Hole Possible Obstructions Cutting the HoleVermont Castings EWF30 Installing Outside Air KitInstallation Precautions Installation Instructionsin the Ceiling Hole Installing the Chimney SystemInstalling the Firestop Spacer Proper Firestop Spacer InstallationPenetrating the Roof Continue Installing Pipe to Complete RunCanadian Requirements for Insulation Shield Additional CeilingsFinish Wall Install Remainder of Chimney SectionsInstall Top Housing or Termination Installing Chimney in a ChaseVermont Castings EWF30 Hearth InstallationMantels Side Wall ProtectionEquivalents COMMON MATERIALS AND FACTORSVermont Castings EWF30 Example of Determining Hearth Extension20008662 Minimum Hearth Extension DimensionsVermont Castings EWF30 Minimum Wall ClearancesEWF30 Controls OperationAttach Handles The DamperBurn Only High-QualityWood Use the Air Control SettingsThe Fan Glass DoorsVermont Castings EWF30 Starting and Maintaining a Wood FireReloading and Reviving a Wood Fire Special Tactics for Cold-ClimateHeatingRemove and Store Ash Safely Vermont Castings EWF3020008662 How to Replace Gaskets MaintenanceCleaning the Glass Adjust the Door Latch PeriodicallyReplace Damaged Door Glass Immediately A Clean Chimney System is Safer and Works BetterThe Chimney System Replacing the Door GasketsFireplace Daily Maintenance ScheduleYearly Spring Cleaning Vermont Castings EWF30Chimney Components Vermont Castings EWF3020008662 EWF30 EWF30 FireplaceVermont Castings EWF30 DescriptionEWF30 EWF30 Fireplace continuedVermont Castings EWF30 Ref. DescriptionScreen Kit Optional AccessoriesFan Kit TWABRDescription Trim KitsVermont Castings EWF30 Model20008662 Vermont Castings EWF30Warranty Limited 3 Year Warranty20008662 CFM Specialty Home Products
Related manuals
Manual 32 pages 45.68 Kb

EWF30 specifications

The Vermont Casting EWF30 is a testament to innovation and craftsmanship in the world of cast iron wood stoves. This highly efficient wood-burning stove combines traditional aesthetics with modern technology, making it a perfect centerpiece for both rustic and contemporary homes. One of the standout features of the EWF30 is its impressive heating capacity. Designed to heat areas up to 2,000 square feet, it is ideal for large spaces, providing consistent warmth during chilly months.

Constructed from high-quality cast iron, the EWF30 offers a durability that only improves with age. This material is known for its excellent heat retention and distribution, resulting in a steady, comfortable warmth. The stove’s classic design includes large ceramic glass windows, allowing users to enjoy the mesmerizing beauty of the fire while safely keeping the warmth inside.

Incorporating advanced technology, the Vermont Casting EWF30 features a clean burning system that significantly reduces emissions. This is a critical aspect for environmentally conscious consumers, as the stove adheres to strict EPA standards, promoting cleaner air and reduced environmental impact. The efficiency of this wood stove is exceptional, with a thermal efficiency rating that maximizes heat output while minimizing fuel usage.

The EWF30 is equipped with a user-friendly air control system, allowing for easy adjustments to the airflow. This system enhances the combustion process, enabling users to achieve the desired flame and heat levels effortlessly. The top-loading design also simplifies the refueling process, making it easier to add wood without disturbing the existing fire.

Aesthetically, the Vermont Casting EWF30 can be customized with various finishes, including traditional black, enamel, and even bold colors, ensuring it fits seamlessly with any interior decor. Additionally, this model includes a removable ash pan, providing a convenient cleaning option.

In summary, the Vermont Casting EWF30 is more than just a wood stove; it is a fusion of tradition and technology. Its heating efficiency, durability, and aesthetic appeal make it a worthy investment for anyone seeking a reliable and stylish heating solution for their home. Whether for ambiance or functionality, the EWF30 is designed to enhance the living experience while respecting the environment.
Top Page Image Contents