Vermont Casting EWF30 Optional Accessories, Fan Kit, Twabr, Screen Kit, Gravity Vent Kit

Page 28
Optional Accessories

Vermont Castings EWF30

Optional Accessories

Fan Kit

FK26 Fan

The FK26 fan helps distribute heated air from within the firebox out into the room. The fan is controlled by a snapstat that turns power on and off as the firebox tem- perature rises above and falls below a preset tempera- ture. A rheostat provides for variable fan speeds.

Specifications

115 Volt / 60Hz / .75 Amps

Maintenance

The fan itself does not require regular maintenance, however, periodic cleaning of the fan and the surround- ing area is required.

Installation

1.Place fan assembly at the back of the unit between hearth supports. Attach using velcro strips provided. (Fig. 31)

2.Install thermal sensor (snapstat) on bottom of firebox by sliding between bracket and firebox.

3.Place electronic fan speed control box (rheostat) to side bracket. Fasten fan speed control box with #10 - 24 hex nuts.

4.If the EB-1 receptacle box (Pt. #ZA1200) was cor- rectly connected when the unit was installed, the fan lead can be directly plugged into the EB-1 plug socket.

The fireplace, when installed must be electrically connected and grounded in ac-

cordance with local codes, with the current CSA C22.1 Canadian Electrical Code or for US installations, follow local codes and the National Electrical Code, ANSI/NFPA No.

70.

Any electrical rewiring of this fan must be completed by a qualified electrician.

Turn off all power before hook up.

TWABR

When using the Model S (triple wall) chimney system, the TWABR adapter collar is required. The TWABR converts the fireplace to a 3-wall system.

Screen Kit

An optional spark screen, EWF36SSK, is available to allow the fireplace to be operated with the door fully open.

NOTE: When operated with the door open and the screen in place, the damper MUST be in the open position.

 

 

Heat Sensor

Electrical

 

Fan

(Snapstat)

 

Box

 

 

 

 

 

Fan Speed Switch

 

 

(Rheostat)

FP1323

 

 

 

Fig. 31

FK26 fan placement.

 

Gravity Vent Kit

The gravity vent kit, Model EWFGVK is designed to provide additional heat to the room the fireplace is in or to adjacent areas.

28

20008662

Page 27 Page 29
Image 28
Page 27 Page 29
Contents EWF30 Fireplace CFM Specialty Home ProductsHomeowner’s Installation and Operating Manual Do Not Discard This Manual Retain for Future UseTable of Contents IntroductionVermont Castings EWF30 Save These Instructions for Future ReferenceSafety Information PrecautionsDescription DraftsSpecifications EWF30EWF30 Woodburning Fireplace Vermont Castings EWF30Vermont Castings EWF30 Chase Installation20008662 30˚ Elbow Offsets Illustration KeyChimney Requirements - Offset Installations Vermont Castings EWF30Planning Information Mounting the FireplacePlanning the Chimney Run The Ten Foot RuleInstallation Chase InstallationChimney Supports Insulating Fireplace Enclosure for Cold ClimatesStraight-UpChimney Installation Offset InstallationFraming EB1 Receptacle HookupPositioning, Safety Strips Securing the Fireplace Ceiling Chimney Hole Possible ObstructionsCutting the Hole Framing the Ceiling HoleInstalling Outside Air Kit Installation PrecautionsInstallation Instructions Vermont Castings EWF30Installing the Chimney System Installing the Firestop SpacerProper Firestop Spacer Installation in the Ceiling HoleContinue Installing Pipe to Complete Run Canadian Requirements for Insulation ShieldAdditional Ceilings Penetrating the RoofInstall Remainder of Chimney Sections Install Top Housing or TerminationInstalling Chimney in a Chase Finish WallHearth Installation MantelsSide Wall Protection Vermont Castings EWF30COMMON MATERIALS AND FACTORS Vermont Castings EWF30Example of Determining Hearth Extension EquivalentsMinimum Hearth Extension Dimensions Vermont Castings EWF30Minimum Wall Clearances 20008662Operation Attach HandlesThe Damper EWF30 ControlsUse the Air Control Settings The FanGlass Doors Burn Only High-QualityWoodStarting and Maintaining a Wood Fire Reloading and Reviving a Wood FireSpecial Tactics for Cold-ClimateHeating Vermont Castings EWF30Vermont Castings EWF30 Remove and Store Ash Safely20008662 Maintenance Cleaning the GlassAdjust the Door Latch Periodically How to Replace GasketsA Clean Chimney System is Safer and Works Better The Chimney SystemReplacing the Door Gaskets Replace Damaged Door Glass ImmediatelyMaintenance Schedule Yearly Spring CleaningVermont Castings EWF30 Fireplace DailyVermont Castings EWF30 Chimney Components20008662 EWF30 Fireplace Vermont Castings EWF30Description EWF30EWF30 Fireplace continued Vermont Castings EWF30Ref. Description EWF30Optional Accessories Fan KitTWABR Screen KitTrim Kits Vermont Castings EWF30Model DescriptionVermont Castings EWF30 20008662Limited 3 Year Warranty Warranty20008662 CFM Specialty Home Products
Related manuals
Manual 32 pages 45.68 Kb

EWF30 specifications

The Vermont Casting EWF30 is a testament to innovation and craftsmanship in the world of cast iron wood stoves. This highly efficient wood-burning stove combines traditional aesthetics with modern technology, making it a perfect centerpiece for both rustic and contemporary homes. One of the standout features of the EWF30 is its impressive heating capacity. Designed to heat areas up to 2,000 square feet, it is ideal for large spaces, providing consistent warmth during chilly months.

Constructed from high-quality cast iron, the EWF30 offers a durability that only improves with age. This material is known for its excellent heat retention and distribution, resulting in a steady, comfortable warmth. The stove’s classic design includes large ceramic glass windows, allowing users to enjoy the mesmerizing beauty of the fire while safely keeping the warmth inside.

Incorporating advanced technology, the Vermont Casting EWF30 features a clean burning system that significantly reduces emissions. This is a critical aspect for environmentally conscious consumers, as the stove adheres to strict EPA standards, promoting cleaner air and reduced environmental impact. The efficiency of this wood stove is exceptional, with a thermal efficiency rating that maximizes heat output while minimizing fuel usage.

The EWF30 is equipped with a user-friendly air control system, allowing for easy adjustments to the airflow. This system enhances the combustion process, enabling users to achieve the desired flame and heat levels effortlessly. The top-loading design also simplifies the refueling process, making it easier to add wood without disturbing the existing fire.

Aesthetically, the Vermont Casting EWF30 can be customized with various finishes, including traditional black, enamel, and even bold colors, ensuring it fits seamlessly with any interior decor. Additionally, this model includes a removable ash pan, providing a convenient cleaning option.

In summary, the Vermont Casting EWF30 is more than just a wood stove; it is a fusion of tradition and technology. Its heating efficiency, durability, and aesthetic appeal make it a worthy investment for anyone seeking a reliable and stylish heating solution for their home. Whether for ambiance or functionality, the EWF30 is designed to enhance the living experience while respecting the environment.
Top Page Image Contents