Roamer Installation GuideDatabase Requirements
Field Definitions | User ID | A unique |
|
| (e.g. social security number). The database is sorted by |
|
| this field. |
| User Name | The |
|
| Dterm. |
| Logical Number | The station number associated with the user name |
|
| under Roamer control. |
| Exempt from Reset? | Whether or not (Yes or No) this user is to be reset to a |
|
| home phone when all system phones are reset. (See |
|
| |
| RSC | The Route Restriction Class assignment of the user. |
| SFC | The Service Feature Class assignment of the user. |
| Physical Number | The station number associated with the phone under |
|
| NEAX control. |
| Tenant Number | The number of the tenant to which this physical |
|
| number is assigned. (See Tenant Number on page 8.) |
| Phone Type | The equipment type of this phone. To indicate a Dterm |
|
| V, this field must be set to 10. |
Note 1: To enter an unassigned physical number into the database, list it under a User ID that is not associated with a user name and leave the Logical Number, Exempt from Reset?, RSC, and SFC fields blank. A user can be entered to the database without a phone assignment by leaving the Physical Number, Tenant Number, and Phone Type fields blank (e.g., security staff who are mobile and not assigned to a home phone).
Note 2: Remember to complete Step 4, Process the Application Database, after entering the information above.
| Page 13 |