NEC NDA-30016-003 Assignment of Free Location Feature, Asyd Command Assignment of System Data

Roamer Installation Guide MAT Assignments

		PBX Correspondence of
		AOKC			AKY1
		OAI		Function
		Key Codes		Key Indices
APM	MAT	1	< . . . .>		34	MAT	Function
Application	AOKC					AKY1
		2	< . . . .>		35		Key #3
Configuration	Command
						Command
		3	< . . . .>		36
Roamer	OAI Key	4	< . . . .>		37	Function Key	. . . . .
							. .. .. .. .
configured	code #10 given	5	< . . . .>		38	Index #43	. . .
for	MSF facility type	6	< . . . .>		39	assigned to
MSF #129	and
		7	< . . . .>		40	Dterm Function
	Op-Code #129
						Key #3
		8	< . . . .>		41
		9	< . . . .>		42
		10	< . . . .>		43
		11	< . . . .>		44
		12	< . . . .>		45
		13	< . . . .>		46
		14	< . . . .>		47

Figure 4-2 OAI Function Key Assignment Example

In the example illustrated in Figure 4-2above, MSF #129 is configured for Roamer

and is assigned through the AOKC command to OAI Key Code 10. OAI Key Code 10 corresponds in the PBX to MAT Function Key Index 43. Each Dterm in the

system that is to access Roamer has function key 3 assigned to MAT Function Key

Index 43 via the AKYI command. Now, for the duration of Roamer’s lifetime, whenever a phone user presses function key 3 on any assigned Dterm, MSF 129

initiates communication with Roamer.

Assignment of Free Location Feature

ASYD Command: (Assignment of System Data)

Make the following setting: Sys 1 Index 4 bit 4 – Enter 1 (Yes) to enable the Free Location Feature.

Note: If OAI goes down and the logical and physical number sets are the same, dis- abling this Free Location Feature disables all relocated logical numbers and only physical number assignments are accessible.

NDA-30016 Revision 3.0 Page 17