NEC NDA-30016-003 manual Secondary OAI Configuration Parameters, Database Requirements on

Application Configuration Roamer Installation Guide

Step 4: Secondary OAI Configuration Parameters

Using the OAI-Confcommand on the APM Configuration Entry screen, make the entry shown for each of the following parameters required by Roamer. Use the instructions provided for this option in the APM Operations Manual:

Parameter	Entry	Description
Database Name #1*	/oai/db/cur/	The path name of the database
	roamerdb	containing user information. The
		database filename roamerdb,
		shown here with its path, should
		be used as the name of the
		corresponding Application
		Definition File. For more
		information see Chapter 3,
		“Database Requirements” on
		page 11.
Timeout Value #1	60	The number of seconds Roamer
		waits for user numeric input
		before it releases the Dterm.
Timeout Value #2	20	The number of seconds Roamer
		waits for input of processing
		symbols such as # before it
		releases the Dterm.
Tenant Number	1	This configuration applies to
		tenant No. 1.
Source Link Name	OAI1X25	The port on the source side of the
		communication link. Entry
		should correspond to a Link
		Name in the APM System
		Configuration file.
Destination Link Name	PBX1X25	The port on the destination side of
		the communication link.
Association Recovery	10	The number of seconds Roamer
		waits before trying to re-establish
		an association with the NEAX
		that has been released.

Page 8 NDA-30016 Revision 3.0