Cal Flame Barbecue Grills & Carts manual Installing Side Burners

Page 12

10

Installation Assembly/

Installing Side Burners

1.Assemble a 3/8” pipe nipple to the 3/8” pipe tee using Teflon tape or pipe sealant. Use only sealant that is approved for use on LP gas.

2.Install the pipe tee assembly to the grill intake pipe. Tighten assembly and align the branch opening of the tee with the hole of the cabinet.

Items Included with Barbecue

1)"T" adapter (3/8")

2)2 each Hose 3/8" Fittings

3)Regulatorw/ Hose

"T" Adapter (3/8" Threaded)

 

To grill, located

To side burner, located

underneath and

behind grill

underneath behind burner.

From Grill

From Side Burner

 

3/8" Fittings

To Propane Tank

NOTE: You will need to use a gas rated

sealer on gas connectors that are not flared.

3.Connect the flexible hose (male end) to the pipe tee.

4.Install and secure the side burner into the island by simply setting it in place.

5.Connect the female end of the flexible hose to the side burner intake pipe.

6.Connect gas supply to the grill.

7.Check for gas leaks using soap water solution.

AOpen barbecue door. Install hose with regulator on propane tank. Then connect other end to "T" adapter. Make sure to use gas rated tape seal when installing adapter to insure proper seal.

C

Grill B

A

BThen take other end of "T" adapter with hose attached and connect to end of male located underneath and at the back of the grill. (Use gas rated tape seal on all connections).

CConnect the last open line to the side burner (Use gas rated tape seal on all connections)

GAS LINE

2009 Barbecue Grills and Carts

www.calspas.com

LTR20091038, Rev. A

Image 12
Contents LTR20091038, Rev. a 12/16/08 Installation / Assembly Using Your GrillCleaning and Maintenance AppendixPlacement and Location Set-UpWhat To Do If You Smell Gas OperationMaintenance and Repair Precautions Regarding ChildrenStorage CartsCabinet Cut-out Dimensions Model Number Description Width Depth HeightInstallation Assembly Leak Testing Procedure Gas Requirements and ConnectionCylinder Specification LP GasTank Requirements LP Gas Hook UpNatural Gas RequirementsConnection Installing the Transformer Installing Grills Barbecue Islands Installing the RotisserieInstalling Side Burners Using Your Grill Grill ControlsLighting the Grill Electronically Lighting the Grill and Infrared BurnersManually Lighting the Grill and Infrared Burners Basic Grill Operation Cooking with the RotisserieCooking with a Convection Grill Cooking with a Charcoal GrillLighting Instructions GrillingTurning on and off the Lights and Fan Drop-In Food WarmerGriddle Burners Drip PanCare of Stainless Steel Covering Your Cart or GrillIsland Cabinets Charcoal GrillAsh Removal Cooking GratesLight Bulb Replacement Light ReplacementLight Removal AppendixTroubleshooting Problem Smell of gas is presentProblem Burner does not ignite Problem Burner tube is misaligned over the orificeProblem Yellow Flame Problem Plugged orificeProblem Misalignment of Igniter on Burner Problem FlashbackSwitching the regulator behind the grill Converting from LP to NGChanging the burner orifices Replace the infrared burner orificesReplace the side burner orifices Replace the main burner orificesInstalling and Replacing Infrared Burners Replacement CoversCal Flame Drop-Ins Cal Flame CartsWarranty Extent of WarrantyManufacturer Warranty Warranty PerformanceCustomer Service Warranty ExclusionsDisclaimers Legal RemediesLMS Customer Service Department Locating the product serial number