Fig. 10
BF
Fig. 11
Fig. 12
BW
10
Push the side burner valve stem (BF) and mount it by using screws and washers included on the valve bracket, threading through the side burner control panel. Affix the Bezel (BT) onto the valve stem using hardware provided. Push the knob (BS) onto the valve stem with the arrow on the knob pointing upwards.
Insert the side burner (DB) into the frame. Affix the side burner to the side burner bracket using hardware #6, #7 and #8 (x2) as shown.
Gently slide the burner tube over the orifice of the valve.
Then place the side burner cooking grate (DD) as shown.
11
Remove the screws and washers from the door handles (CF) and assemble the handles to the left and right door (CG & CH) by using the same hardware provided on the door handles.
Insert the grease tray (CI) into the upper rail (CJ) as shown.
Unscrew the igniter cap and place the AA battery #12 provided into igniter (BI) with positive end (+) facing outward. Screw the ignitor cap onto the ignitor as shown.
12
Attach the side burner igniter wire (BW) as shown.
2 0