Fig. 13
Fig. 14.1
13
Assemble the side burner shelf (DA) to the left upper side panel (EA) using hardware #1, #2, #3 (X3) and #4, #5 and #6 (X2). Assemble the side shelf (DI) to the right upper side panel (EB) by using the same hardware above.
DO NOT FULLY tighten all screws while assembling. Make sure the shelves are well fitter with the side panels before tightening.
14.1
Insert the side burner valve stem (CC) and mount it using the screws and nuts attached to the valve bracket #4, #5 and #6 (x2),
and guide through the side burner shelf control panel. Attach the control knob (CI) to the valve stem with the triangle sign, on the knob, pointing upwards. Insert the side burner (DE) into the side burner drip pan (DG). Gently place the burner over the orifice of the valve. Place the side burner grate (DD) in position as shown.
Attach the Digital Grilling System (DC) to the side burner shelf control panel as shown using ST3.0x10
2 3