Ruinet Utility User Manual

Page 29 of 46

2.7.E – Error Messages

The error screen contains messages printed by the FieldServer kernel as well as messages from many drivers. Starting late in 2002, drivers started sending their messages to the F Screen.

The error screen is a circular buffer which can hold a limited number of lines of information. Once full, as each new line is added to the bottom of the buffer, the top line is removed.

Kernel Messages - informational messages for FieldServer use, normally non critical.

Other messages – non critical but may assist in troubleshooting.

To clear the error screen push the R key. This doesn’t affect the operation of the FieldServer, drivers or communications to remote devices.

Press V to Display version information.

Figure 2.12

System Errors cause the FieldServer to turn on the red SYS LED on the FieldServer front panel. Please report all system errors to FieldServer Technologies.

Turn the LED off by clearing the E-screen with the R key.

Driver Messages – informational only, but may assist in troubleshooting.

Figure 2.13

To see more push the

 

PgDn or PgUp keys

2.8.F – Driver Messages

The F screen is similar to the E-Screen. Newer type drivers send their error or informational messages to the F screen. In the past all messages were sent to the E screen.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Page 29
Image 29
FieldServer 1.1 user manual Error Messages, Driver Messages