Ruinet Utility User Manual
|
| Page 19 of 46 |
|
|
|
|
|
| Parameter | Description |
|
| RX IP not for us | The number of received IP packets not meant for the FieldServer. |
|
| Max RX buffers used | The maximum number of receive buffers used since restart. |
|
| Rx buffers in use | The number of receive buffers currently in use. |
|
2.4.N - Node Overview
Node number - type number to go to detail for that node, e.g. type 02 to navigate to detail for the node called “MB_Node1”
Every attempt is made to standardize the way in which drivers report stats but in some drivers unavoidable differences exist.
Displays the number of errors for a node. Occasional errors may indicate noise but also may indicate a systematic error. Refer to the FieldServer Troubleshooting Guide for more information. This does not affect the operation of the FieldServer, drivers or communications to remote devices.
Push the R key to set all statistics for all nodes to zero. This doesn’t affect the operation of the FieldServer, drivers or communication to remote d i
Press the G key and type the node number to view the details for a particular node.
Figure 2.6 – Node Overview Screen.
To view next or previous node, use the arrow keys.
To view Next Aspect of the node detail, use the spacebar.
Push the M key to see a filtered list of Map Descriptors for the node currently being displayed.
To view more of the same aspect use the PgDn or PgUp keys.
Figure 2.7 – Node Overview – Settings Aspect Page 1
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
