![](/images/new-backgrounds/1315583/31558327x1.webp)
Ruinet Utility User Manual
|
| Page 14 of 46 |
|
|
|
| |
| Parameter | Description | |
|
| The number of times a cache Map Descriptor containing outdated | |
| Cache - Created | data has been polled resulting in the creation of a new cache Map | |
|
| Descriptor. See Error! Reference source not found. | |
| Cache - Bumped | The number of expired cache blocks. See Error! Reference | |
| source not found. | ||
|
| ||
|
| Writes are never cached - the external device is put on hold while | |
| Pex Write Thru | the FieldServer resends the message to the PLC and waits for the | |
| response. When the FieldServer receives the response from the | ||
|
| PLC it in turn responds to the external device. This operation is | |
|
| counted as a PEX Write thru. | |
|
| The maximum time that the FieldServer has taken since the last | |
| Server Response Max | reset to receive a message from an external device, poll the PLC | |
| and respond to the external device. The SCADA Hold Timeout | ||
|
| ||
|
| parameter should be set higher than this limit | |
|
| This is the average time that the FieldServer has taken since the | |
| Server Response Avg | last reset to receive a message from an external device, poll the | |
| PLC and respond to the external device. Reconfigure if response | ||
|
| ||
|
| times are slow. | |
| Link Control |
|
|
| BACnet specific – see Driver Manual. | ||
| |||
|
|
| |
|
|
| |
| Messages Reconstructed | Metasys Specific – see Driver Manual. | |
| Unsupported Property | The driver encountered an unsupported property in a message. | |
| Unsolicited Messages Recd | A message was received without the driver polling for it. | |
| Single Write | A write data message containing a single data element. | |
| Single Item Read | A read data message requesting a single data element. | |
| Block Write | A write message containing a block of data elements. | |
| Block Read | A read message requesting a block of data elements. | |
| Sequence Error | Messages containing sequence numbers received out of | |
| sequence. | ||
|
| ||
| Data Object Startup | Data requested from a node in | |
| Expedite Read | The number of Map Descriptors given the highest priority to | |
| Expedite Write | complete a read/write first. | |
| Fasttrack Read | The number of Map Descriptors given a higher priority to complete | |
| Fasttrack Write | a read/write as soon as possible. | |
| Fasttrack Overrun Read | The number of times the buffer holding fasttrack read/write Map | |
| Fasttrack Overrun Write | Descriptors overflowed. | |
| Max Read Response Time | Maximum/Minimum/Average time in seconds that passed before a | |
| Min Read Response Time | response was received to a read message sent by a driver acting | |
| Avg Read Response Time | as a Client. | |
| Max Write Response Time | Maximum/Minimum/Average time in seconds that passed before a | |
| Min Write Response Time | response was received to a write message sent by a driver acting | |
| Avg Write Response Time | as a client. | |
| Max Passthru Response Time | Maximum/Minimum/Average time in seconds to receive a | |
| Min Passthru Response Time | response to a poll sent using the Passthru mechanism. |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)