Ruinet Utility User Manual
|
| Page 17 of 46 |
|
|
|
| |
| Parameter | Description | |
|
| external device trying to access it. | |
|
| Messages received but unable to be processed - normally | |
| Msg Ignored | because the driver has not implemented functionality for that | |
|
| message. | |
| Sys Cleared | The number of times that Data Arrays were cleared after a | |
| |||
|
| fire alarm panel) | |
| Squelch TX2 | The number of bytes received during the squelch timing period | |
|
| started when RTS is asserted. | |
| Squelch RX1 | The number of bytes received during the squelch timing period | |
|
| started when RTS is | |
| Cache Failed | FieldServer unable to create a cache block due to memory | |
| shortage or inability to find a downstream node. | ||
|
| ||
| Segmentation Not Supported | The received message was segmented but the driver does not | |
|
| support | |
| Passthru Retries3 | Produced when a Passthru poll is busy on the downstream side, | |
|
| and an identical poll (retry) is received on the upstream side. | |
| Passthru Overruns2 | Produced when a Passthru poll is busy on the downstream side | |
|
| and a different poll (not a retry) is received on the upstream side. | |
| Passthru Early Retries | A Passthru Retry, which occurs when the upstream retry is | |
| received before the 1st downstream Passthru poll has been sent. | ||
| Passthru Normal Retries | A Passthru Retry, which occurs when the upstream retry is | |
| received after the 1st downstream Passthru poll has been sent. | ||
| Passthru Early Overruns | A Passthru Overrun, which occurs when the upstream retry is | |
| received before the 1st downstream Passthru poll has been sent. | ||
| Passthru Normal Overruns | A Passthru Overrun, which occurs when the upstream retry is | |
| received after the 1st downstream Passthru poll has been sent. | ||
| Passthru Early Overruns Fails | This statistic is currently not used. | |
| Passthru Normal Overruns | ||
| Fails |
|
|
| PWT Expired | The Passthru Window Timer expired before the downstream | |
| Passthru poll could be sent. | ||
|
| ||
2.3.5.Connection Overview - API Aspect
These statistics are produced by the FieldServer kernel’s API (Application Programmer Interfaces). They are intended for advanced users only.
Press the 1 key or the 2 key to change the filter on these stats. 1 = TCP API
2 = Ethernet API (Default)
2Information is available in ENOTE19. Enotes are available on the Web at www.fieldserver.com.
3Currently only produced by the Metasys driver
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
