Char-Broil 466231203 manual Troubleshooting, Problem Possible Cause Prevention/Cure

Page 15

Troubleshooting

Problem

Possible Cause

Prevention/Cure

 

 

 

 

 

 

 

 

Burner will not

Wires and/or electrode covered with

Clean wires and/or electrode with rubbing alcohol and clean swab.

light using ignitor.

cooking residue.

 

 

 

Electrode cracked or broken "sparks at

Replace electrode(s).

 

crack"

 

 

 

Electrode tip not in proper position

Main Burners: Tip of electrode should be pointing toward tip of collector

 

 

box. The distance should be 1/8" to 1/4", adjust if necessary.

 

 

Sideburner: Tip of electrode should be pointing toward gas port opening

 

 

on burner. The distance should be 1/8" to 3/16", adjust if necessary.

 

Wires are loose or disconnected.

Reconnect wires or replace electrode/wire assembly.

 

Wire is shorting (sparking) between

Replace ignitor wire/electrode assembly.

 

ignitor and electrode.

 

 

 

Dead battery.

Replace with a new AA battery.

 

 

 

 

Burners will not

No gas flow.

Turn gas on at source.

match light.

Obstruction of gas flow.

Clear burner tubes.

 

 

Disengagement of burner to valve.

Reengage burner and valve.

 

 

 

Flames blow out.

High or gusting winds.

Turn front of grill to face wind or increase flame height.

 

 

 

Flare-up.

Grease buildup.

Clean grill.

 

Excessive fat in meat.

Trim fat from meat before grilling.

 

Excessive cooking temperature.

Adjust (lower) temperature accordingly or use indirect cooking.

 

 

 

Persistent grease

Grease trapped by food buildup around

Turn knobs to OFF. Turn gas off at gas source. Leave lid in position

fire.

burner system.

and let fire burn out. After grill cools, remove and clean all parts.

 

 

 

Flashback...

Burner and/or burner tubes are blocked.

Clean burner and/or burner tubes.

(fire in burner tubes)

 

 

 

 

 

 

 

466231203 • 15

Image 15
Contents 387-6057 can ASSEMBLY,USE and Care ManualSafety Symbols Installation Safety PrecautionsWarranty Table of ContentsParts List Before Beginning AssemblyExploded View Unpack and remove all protective packaging Assembly4x1/2 Phillips-head screws. Repeat this procedure for Important Bracket with cut-out installs on front leftSee Fig Before Attaching Regulator to LP TankLP Liquefied Petroleum Gas Use and CareBefore Your First Cookout LP TankLP Tank Leak Test Connecting The Regulator To The LP TankLP Tank Removal, Transport And Storage Leak Testing Valves, Hoses and RegulatorSafety Tips LP Tank Safety Valve Retainer Cap StrapBurner Flame Check For Safe Use Of Your GrillApartment Dwellers Ignitor LightingValve Check Cleaning The Burner AssemblyGeneral Grill Cleaning Ignitor CheckIndirect Cooking Instructions Food SafetyHow To Tell If Meat Is Grilled Thoroughly Indirect CookingProblem Possible Cause Prevention/Cure TroubleshootingDivision of W.C. Bradley Co