Char-Broil 463222209 manual Assembly, Rear

Page 16

ASSEMBLY

1

Screw in the two locking casters at the rear of the bottom shelf and the two fixed casters at the front, and tighten with the caster wrench provided.

Fixed caster

Locking caster

Front

Bottom shelf

Rear

2

Attach side panels to bottom shelf using three

1/4-20x1/2”screws, 7mm lock washers per panel.

IMPORTANT: Panel with hole must be on left side of bottom shelf.

Left side panel (with hole)

Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.

1/4-20x1/2” screw

7mm lock washer

Qty.6

Qty.6

1/4-20x1/2” screw 7mm lock washer

Right side panel

16

Image 16
Contents Estimated assembly time 30 minutes Product GuideINSTALLER/ASSEMBLER Installation Safety Precautions California PropositionLP Liquefied Petroleum Gas LP Cylinder FillingLP Cylinder Exchange Connecting Regulator to the LP Cylinder LP Cylinder Leak TestLeak Testing Valves, Hose and Regulator Turn all grill control knobs to OFFFor Safe Use of Your Grill and to Avoid Serious Injury Main Burner Ignitor LightingSideburner Match Lighting Burner Flame CheckTurning Grill Off Ignitor CheckCleaning the Burner Assembly General Grill CleaningStoring Your Grill Correct Engagement Reinstall Screws Grill Halogen Light Cleaning the Lens Limited Warranty Parts List Not PicturedParts Diagram Assembly RearSide of cart Control Panel Front Brace Inside of left side shelf Debris collecter Panel Upper back panelHoles on fascia to Sideburner grate #8x3/8 self-tapping screw Qty Heat shield Qty Clarity of illustration Emitter PlatesRear of grate Cooking grate Cylinder screw at rear of cart Troubleshooting Emergencies Possible Cause Prevention/SolutionAUTO-CLEAN Troubleshooting Electronic Ignition SectionPage Page Page Warranty Registration Department Box Columbus, GA