Char-Broil 463222209 manual Holes on fascia to

9

First, remove the two screws and lock washers already attached to the sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.

Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach using two #8-32x3/8”screws and 4mm lock washers. Press sideburner control knob onto valve stem.

#8-32x3/8” screw	4mm lock washer	Note: Use upper and lower
	Qty.2	holes on fascia to
Qty.2		attach bezel
	Sideburner
	shelf fascia

Lock washer		Valve stem
		Control knob bezel
Screw		4mm
		lock washer
Valve stem		#8-32x3/8” screw
Screws and Washers
removed from valve bracket
	Sideburner	Sideburner control knob
	valve bracket

10

Insert sideburner burner into left shelf.The stud on bottom of burner fits into rear small hole in sideburner drip pan on shelf, shown A. Secure burner to sideburner drip pan with one Wing nut, shown B.Make sure burner tube engages sideburner valve, shown C.

B

Wing nut

C

Burner tube

Wing nut

Qty.1

Sideburner burner

Sideburner drip pan

Sideburner drip pan

A

21