Char-Broil 463222209 manual Side of cart

3

Attach light adapter to back panel using four #8-32x3/8”screws, 4mm lock washers, 4mm flat washers and #8 nuts, shown A.

Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using two 1/4-20x1/2”screws and 7mm lock washers each side. Secure lower back panel to bottom shelf using one 1/4-20x1/2”screw and 7mm lock washer, shown B.

#8-32x3/8” screw	1/4-20x1/2” screw
Qty.4	Qty.5
4mm lock washer
Qty.4	7mm lock washer
4mm flat washer	Qty.5
Qty.4
#8 Nut
Qty.4
#8 Nut		A
Adapter

4mm flat

washer 4mm lock washer

#8-32x3/8” screw

7mm

lock washer 1/4-20x1/2”

screw

Adapter

1/4-20x1/2” screw

7mm lock washer

B

4

This step requires two people to lift and position grill head

onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging inside
the cart. Grill head must face open	Grill head
side of cart.

Regulator hose

17