LIGHTING ILLUSTRATIONS
Main& side burner lighting illustration | Rotisserie & Searing burner lighting illustration |
Step 1: Make sure the lid is open.
Step 2. Push and turn main or side burner knobs to ”IGNITE/HI” Ignition. Pilot torch will light. Hold for 3~4 seconds until burner is lit.
Step 3. You may need to try 3 or 4 times to light the burner. After the burner is lit, adjust the knob as desired.
Step to light the rotisserie burner:
Push and turn the rotisserie knob to ”IGNITE/ON” position and hold for 3~4 seconds, then push electronic ignition button at the same time until burner
Step to light the searing burner:
Push and turn the searing knob to “IGNITE/HI” position and hold for 3~4 seconds to light the burner. Once it islit, release electronic igniter and still hold in the sear burner knob for another 15 seconds to be sure the burner stay lit
If ignition does not occur in 5 seconds, turn the burner knob to OFF, wait 5 minutes and repeat the lighting procedure.
18