Electrolux 57" Stainless Steel Gas Grill manual Grill Assembly, Ignitor Attachment

Grill Assembly 4

Note: Prior to assembly remove protective film from stainless steel parts

Assembly requires: 4 tools and a Friend

Tools required:

1/4” socket wrench	Cap
1/2” socket wrench
adjustable wrench
scissors

Ignitor Attachment

1.Remove the ignitor cap, spring assembly, bat- tery and lock nut from ignitor. (See Fig. 1)

2.Insert the threaded section of the ignitor into the U-shaped cut out of the ignitor mounting bracket. (See Fig. 2)

3.Insert the threaded section of the ignitor through the hole in the shelf and secure to shelf using the lock nut. (Use the ignitor assembly diagrams to determine which ignitor goes with which shelf.) Tighten Securely. (See Fig. 3)

4.Re-insert the battery, positive side first, and spring assembly and attach the ignitor cap. (See Fig. 4)

5.Repeat above steps for second ignitor on the other shelf.

Battery

Fig. 1

Spring
	Locking		Mounting
Assembly
	Nut	Cylinder	Bracket

Fig. 2

Fig. 3

Fig. 4

Keyhole

GL57 Ignitor Assembly

Right Shelf (Double Wire) Left Shelf (Four Wire)

4