Step 22 - Attach LP Cylinder
•Swing the Cylinder Retainer Clip to outside of the Bottom Shelf. Place the LP Cylinder in circular recessed area on Bottom Shelf. Position Cylinder Retainer Clip over round shoulder of the LP Cylinder until it meets the cylinder carrying handle.
•Take the protective cap off the cylinder valve. Hold Regulator in a straight line with LP Cylinder valve so the connection does not cross thread. Insert nipple of regulator into the LP cylinder nozzle opening. Hand tighten coupling nut in clockwise direction. Do not use tools.
•Turn all control knobs and LP Cylinder valve to the “Off” position.
You are now ready to use your grill!
Caution: When swinging Cylinder Retainer Clip into position, keep fingers and hands on corners of 
Clip to prevent Pinching.
Cylinder
Retainer Clip
Hand tighten coupling nut in clockwise direction
27