Aussie pmn owner manual Mounting Hood

Page 21


STEP 13 - Mounting Hood		TOOLS:


			(ITEM 35)
(ITEM 34)			(ITEM 35)
HINGE PIN			COTTER PIN
2 pcs			2 pcs

•Align Hood Hinge tabs with Bottom Hinge tabs and insert Hinge Pins from outside. Secure each Hinge Pin with Cotter Pin as shown.

•Close Hood and check assembly to make sure that the hood and bowl fit properly together. Adjust hood by loosening the Hinge Bolts and retightening.

21

Image 21

Contents AussieTM For Your SafetyImportant Safeguards Page Am 5 pm E.S.T Mon. Fri Telephone Page PART/ Description BushmanElite Part# PART/ Description PART# Tools Cylinder Support/ Retainer Clip AssemblyAttach Legs to Bottom Shelf Attach Wheels to CartTools Attach Drip Cup Holder Attach Rear Support BarAttach Burner Extend Heat Shield toward left side tank side of Bowl Attach Heat ShieldMount Igniter/ Flavor Activator Mounting Stud to Grill Bowl Mount Grill bowl to Legs How to perform a leak test Leak Test and Attach Control Panel Supplies Needed for a Leak Test Attach Control Panel Attach Igniter WireMounting Hood/ Bowl Hinges Mounting Hood Insert Drip Cup Attach Hood HandleSPACER, Side Table Attach Side TablesTools Bushman Elite Models only Elite Right Side BurnerAttach Flavor Activator Insert Cooking Grid Clip to prevent Pinching Attach LP CylinderConnecting/ Disconnecting LP Gas Cylinder to Grill GAS, CYLINDER, Hose Regulator InformationLP Cylinder Before Using Your LP GAS Grill PrecautionsSelecting a Location Operating the LP GAS Grill Leak TestingPreparation Before Cooking Lighting the Grill Using IgniterLighting the Side Burner Elite Series Only Manual Lighting of the Grill Care and Maintenance Porcelain coated Cooking Surfaces Deluxe & Elite Series Only Burner MaintenanceCleaning the Grill Bowl Preventive MaintenanceFlavor Activator Drip CupProblem Possible Cause Solution TroubleshootingFlare up Important Notice Aussie Grill Company Limited Warranty