Aussie 69F6U00KS1 manual Hose Connection Tubular Burner ends

Page 13

13

6.Check for leaks by brushing the soap solution on all gas valves, hose connections and fittings. (Shown by the heavy arrows in Fig. 3 and 4) Make sure you generously brush the locations with the soap solution, completely surround- ing the connections and fittings.

Hose Connection

Fig. 4

Tubular Burner ends

Fig. 5

NOTE: After checking the connections and fittings in Figure 4, replace the control panel in the same manner as it was removed. Take special care to be sure the valve ends are inserted into the openings in the burner ends as shown in Figure 5. If all valve ends do not immediately align with the burner end openings, starting at one end, grasp the tube burner inside the firebox and gently move it until the valve seats in the open end.

7.If “growing” bubbles appear on any of the connection points, you have detected a gas leak. Immediately close the LP Gas Cylinder valve by turning handle clockwise

a.If leak appears at either end of hose and regulator assembly, retighten the connection at the leak, but do not over-tighten. (NOTE: Only hand tighten at coupling nut in Fig. 2 shown on previous page) Repeat Leak Test.

b.If the leak is coming from the Gas Cylinder, from the valves at the Control Knobs, or if the leak cannot be stopped, do not use the grill. Call Customer Service at 1-800-251-7558. Be sure to have the grill model number and serial number printed on the black label, located on the back face of the bottom tube of the cart base. . If you need a replacement part under warranty, a proof of purchase will be necessary.

8.Upon completion of leak test, turn all Control Knobs to the “Off” position. Turn the handle on the LP Gas Cylinder clockwise until it stops. Disconnect LP Gas Cylinder by turning coupling nut on regulator in a counterclockwise direction until regulator is released from threaded LP Gas Cylinder nozzle.

9.Place the protective cap over LP Gas Cylinder nozzle.

10.Replace Control Panel and retighten all bolts. (Fig. 1)

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sets Up In Minutes Great for Every Occasion Six Burner Event GrillCarbon Monoxide Hazard Tools Required for AssemblyPreparation for Assembly ContentsPacking List Step Attaching the Wheels and Casters Assembly InstructionsStep Attaching Cylinder Bracket Step Attaching the Firebox HandlesStep Unfolding Cart Set-Up InstructionsStep Unfolding Firebox Handles Latch Latch Catch Step Placing the Grill Body on the CartStep Flavor Activator / Cooking Grid Assembly Folding/Preparation for Transport Using Gas Connecting/Disconnecting the GasLP Gas Cylinder Disconnecting LP Gas Cylinder Connecting LP Gas CylinderLP Hose and Regulator Installation Codes Before Using Your LP Gas GrillSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Hose Connection Tubular Burner ends Lighting the Grill Using the Pulse-Spark Ignitor Manual Lighting of the Grill on Check the Flame Manually Lighting the GrillGrill Cooking Direct Method Cooking On the Gas GrillDirect Cooking on the Grids End of Cooking SessionCleaning the Grill Care and MaintenanceHow to Clean the Burners Bottom Body Panel Removal Storage and Transportation Emergencies TroubleshootingMaintenance Clean the Burners. See How to Clean Burners in CareSee How to Clean Burners in Care and Maintenance Important Notice Parts Illustration Key Description Quantity Parts ListNot Pictured Description QuantityMeco Corporation Limited Warranty Limited Warranty
Top Page Image Contents