20
In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the grill has been stored for an extended period of time.
Valve
Control Knob
Burner
Spider webs or nest inside Venturi Tube
Venturi Tube | Fig. 12 |
How to Clean the Burners
1.Make sure the Control Knobs are turned “Off” and the grill is completely cooled.
2.Carefully remove Cooking Grids and Flavor Activators.
3.To remove each Main Burner, first remove the screw that fastens the burner flange to the firebox. (Fig. 13)
4.Gently lift the rear of the Burner. (Fig. 13) Slide the Burner towards the grill back to move the Venturi Hole off of the Valve nozzle. (Fig. 14) Lift each Main Burner from the grill. To completely remove the burner from the grill, disconnect the electrode wire from the back of the igniter box behind the control panel and carefully pull the wire through the inside of the firebox
Lift Burner up and out.
Remove screws
View from inside front body
Valve nozzle
|
| Burner Venturi Hole fits centrally |
Fig. 13 | Fig. 14 | around Valve nozzle. |