Aussie 69F6U00KS1 manual Important Notice

Page 25

25

Problem

Flare up

Persistent grease fire

Unable to fill LP tank

Humming or whistling from regulator

Possible Cause

Grease build-up

Excessive fat in meat

Grease trapped around burner system

Some dealers have older fill nozzles with worn threads

Outside temperature, humid- ity, barometric pressure, and the gas level within the tank may cause the rubber dia- phragm inside the regulator to vibrate, making a humming or whistling sound.

Solution

Clean grill.

Trim fat from meat before grilling.

Turn Control Knobs “Off” and turn handle of LP Gas Cylinder clockwise until it stops. Carefully and let fire burn out. After the grill cools, remove and clean all parts.

The worn nozzles do not have enough “bite” to engage the valve. Try another licensed LP dealer.

Although this sound may be alarming, this is NOT danger- ous as long as it is not accompanied by the smell of gas. Simply adjust the Burner settings, and usually the sound will subside. If the humming sound persists, a change in atmospheric conditions will eventually stop the vibration.

If your problem is not resolved from the information provided above,

please visit our website @ www.aussiegrills.com or call Customer Service at 1-800-251-7558.

If you need a replacement part under warranty, a proof of purchase will be necessary.

IMPORTANT NOTICE

The Gas Grill is set up to operate with a LP Gas Cylinder equipped with an OPD (Overfill Prevention Device).

This is a secondary device to prevent overfilling your LP Gas Cylinder. The proper methods for the filling of your LP Gas Cylinder are by weight or volume, as described in NFPA 58. Please make sure your filling station fills your LP Gas Cylinder by weight or volume. Ask your filling station to read purging and filling instructions on the LP Gas Cylinder before attempting to fill.

Rises up while filling, then stops when full.

!WARNING

Do not exchange the LP Gas Cylinder unless the exchange LP Gas Cylinder is equipped with an OPD. Otherwise you will lose the OPD (Overfill Prevention Device) feature. If there is not an LP Gas Cylinder available for exchange equipped with an OPD, we recommend that you have your LP Gas Cylinder filled at an authorized LP gas dealer by a qualified attendant.

Image 25
Contents Sets Up In Minutes Great for Every Occasion Six Burner Event GrillCarbon Monoxide Hazard Tools Required for AssemblyPreparation for Assembly ContentsPacking List Step Attaching the Wheels and Casters Assembly InstructionsStep Attaching Cylinder Bracket Step Attaching the Firebox HandlesStep Unfolding Cart Set-Up InstructionsStep Unfolding Firebox Handles Latch Latch Catch Step Placing the Grill Body on the CartStep Flavor Activator / Cooking Grid Assembly Folding/Preparation for Transport Using Gas Connecting/Disconnecting the GasLP Gas Cylinder Disconnecting LP Gas Cylinder Connecting LP Gas CylinderLP Hose and Regulator Installation Codes Before Using Your LP Gas GrillSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Hose Connection Tubular Burner ends Lighting the Grill Using the Pulse-Spark Ignitor Manual Lighting of the Grill on Check the Flame Manually Lighting the GrillGrill Cooking Direct Method Cooking On the Gas GrillDirect Cooking on the Grids End of Cooking SessionCleaning the Grill Care and MaintenanceHow to Clean the Burners Bottom Body Panel Removal Storage and Transportation Emergencies TroubleshootingMaintenance Clean the Burners. See How to Clean Burners in CareSee How to Clean Burners in Care and Maintenance Important Notice Parts Illustration Key Description Quantity Parts ListNot Pictured Description QuantityMeco Corporation Limited Warranty Limited Warranty