Aussie 3 ELITE Side Table Pcs LeftFront WheelLeg, Towards inside Left Rear, 4-20 X 1-3/8, Bolt

ASSEMBLY INSTRUCTIONS

To reduce the risk of injuries:

·Wear protective gloves when handling parts that have sharp edges to prevent cuts.

·Some assembly may require help from another person to prevent handling or lifting injury. Observe where noted.

TOOLS:

and/or

STEP 1) Legs/Side Table Assembly:

Attach the Wheel and Caster Legs to the Side Tables with 1/4-20 x 1-3/8” Bolts through the legs into threaded insert in side tables. Position legs exactly as shown. Do not completely tighten bolts.

(2) Side Table
2 pcs.	(3) LeftFront WheelLeg	Left Rear Wheel Leg

(7) 1/4-20 X 1-3/8” Bolt

16 pcs

(5) Right Rear Caster Leg (6) RightFront Caster Leg

(3) Left Front
	Velcro patches
Wheel Leg	towards inside
		(4) Left Rear
		Wheel Leg
	(7) 1/4-20 X 1-3/8”
		Bolt

(5) Right Rear	(6) Right Front
Caster Leg	Caster Leg

Velcro patches towards inside

(7) 1/4-20 X 1-3/8”

Bolt

FIG. 1A Wheel Legs and Side Table Assembly

FIG. 1B Caster Legs and Side Table Assembly

3