Aussie 3 ELITE manual Important Notice

Page 24

IMPORTANT NOTICE

The Gas Grill is setup to operate with a LP Gas Cylinder equipped

with an OPD (Overfill Prevention Device).

This is a secondary device to prevent the overfill of your LP Gas cylinder. The proper methods for the filling of your LP Gas cylinder are by weight or volume, as described in NFPA 58. Please make sure your filling station fills your LP Gas cylinder by weight or volume. Ask your filling station to read purging and filling instructions on the LP cylinder before attempting to fill.

Raises up while filling then stops when full.

Rises up while filling then stops when full.

Do not exchange the LP Gas cylinder unless the exchange LP cylinder is equipped with an OPD. Otherwise you will lose the OPD (Overfill Prevention Device) feature. If there is not an LP cylinder available for exchange equipped with an OPD, we recommend that you have your cylinder filled at an authorized LP gas dealer by a qualified attendant.

24

Image 24
Contents LP Gas Grill Assembly and Use Manual Contents Assembly InstructionsCaster Legs and Side Table Assembly Side Table Pcs LeftFront WheelLegTowards inside Left Rear 4-20 X 1-3/8Page Page Page Page Page Page Flame Diffuser Flame Diffuser Guides Cooking GridCONNECTING/DISCONNECTING the GAS Using GASLP GAS Cylinder LP Hose and RegulatorInstallation Codes Operating and Maintining Your LP GAS GrillSelecting a Location Performing a Leak TestLighting the Grill Using the Integra Spark Ignition System How to perform a leak testControl Panel Gas Manifold Fittings Hose Fittings Regulator Coupling Nut Connection Regulator SealManual Lighting the Grill Far Right Knob Far Left Knob Match Lighting HolesCheck Your Flame Roasting Hood Cooking Grill Cooking Operating the GAS GrillWarming Rack Yellow Tip Primarily BlueCleaning the Grill END of Cooking SessionCleaning the Burners How to Clean the BurnersRe-assembly of the Burners Lift up and slide Burner backStorage Grease fire or exces- sive flames above cooking surfaceTroubleshooting Burner will not light using the IgniterBurner will not light using a match Low flame Or low heatFlames blow out Flare upService Parts Service Parts Important Notice 03.6098.01 REV