(d)If the pilot is lit, positioned correctly, and has a proper flame, close all the burner valves , allow to cool and then remove the top grate and radiant over the burner.
Remove the burner by lifting the rear of the burner off the support pin, slide it towards the rear of the broiler, enough to clear the burner orifice (fig. 3 or 4).
Using a thin wire or pin, check to see that the orifice is clear, taking care not to enlarge the hole. Replace the burner, radiant and grate and attempt to light it again.
If the burner will not light, the burner valve could be defective. Contact your dealer, the factory or a local service company.
For additional information contact: Bakers Pride Oven Co., Inc. (914)
5. VALVE ASSEMBLY VIEWS: | (A = Cap |
|
|
FIGURE 2 | Air Mixer Cap And Pilot Burners |
|
|
FIGURE 3 | Side View CH Series |
|
|
FIGURE 4 | Side View XX Series |
|
|
10