Broilmaster H3X-1, H4XN-1, H3XPK-1, H4X-1 Propane GAS Grills, Grill Location, Cylinder Requirements

Page 18

PROPANE GAS GRILLS

Grill Location

When choosing the ideal location for your Broilmaster® Premium Gas Grill, remember this grill is designed for outdoor use ONLY.

You should never install or operate your grill in any building, garage, or other enclosed area.

For your safety, this grill should not be installed or operated under any combustible materials, such as carports, covered porches, awnings, or overhangs.

Never install or operate your grill in or on any recreational vehicle or boat.

CAUTION: The installation and operation of this grill at clear- ances less than specified below may lead to the possibility of fire, property damage, or personal injury.

A minimum clearance of sixteen inches (16") is required from the sides of the grill to any combustible material.

A minimum clearance of eighteen inches (18") is required from the back of the grill to any combustible material.

Some examples of combustible materials are a wall, a fence, patio furniture, or the wall of your home.

The area surrounding the grill should be clear to ensure proper ventilation. Do not obstruct the flow of combustion and ventilation air in any way. The ventilation openings on the propane cylinder enclosure must also remain free and clear of debris.

Portable grills should be level and positioned away from direct wind prior to each use.

WARNING: Do not install or operate this grill where gaso- line or other flammable materials are used or stored. Failure to comply with this warning could result in explosion or fire causing property damage or personal injury.

Cylinder Requirements

Your Broilmaster® Premium Gas Grill requires a standard twenty (20) pound propane gas cylinder.

The maximum height allowable for a replacement cylinder is ap- proximately twelve (12") inches (30.5 centimeters).

The propane gas cylinder used must be:

1.Constructed and marked in accordance with the specifications for LP gas cylinder of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous Goods; and Commission as applicable.

2.Provided with a listed overfilling protection device (OPD).

3.Provided with a listed safety device having direct access with the vapor space of the cylinder and the cylinder supply system must be arranged for vapor removal.

4.Provided with a shutoff valve terminating in a valve outlet as specified in the Standard for Compressed Gas Cylinder Outlet and Inlet Connections, ANSICGA-V-1.

5.Provided with a plug to effectively seal off the cylinder outlet when the cylinder is being stored or transported.

6.Provided with a collar to protect the cylinder valve.

Caution: Do not use a propane gas cylinder which has a capacity greater than twenty (20) pounds with this grill and side burner.

Page 18

B101623-2-0112

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Models If YOU Smell GAS Congratulations Empire Comfort Systems, IncTable of Contents Warranty Parts HOW to Order Repair PartsParts Not Under Warranty Master Parts Distributor ListP3X Series Parts Diagram P3X Series Parts List Index Part Description Part NumberP3SX P3SXN P3X P3XN P3XF P3XFN P4X Series Parts Diagram P4X Series Parts List P4XN P4XF P4XFNH3X Series Parts Diagram H3X Series Parts List Index No Part Description Part NumberH3X H3XN H4X Series Parts Diagram H4X Series Parts List H4X H4XNR3 Series Parts Diagram R3 Series Parts List Index Description Part NumberR3N R3B R3BN Before You Begin Grill AssemblyWarranty Terms Recommended ToolsWarranty Terms Propane GAS Grills Grill LocationCylinder Requirements Connection Requirements Propane Cylinder SafetyCylinder Storage See FigurePressure Regulator and Hose Assembly Connecting to Propane Gas / Cylinder Retention MeansClockwise Natural GAS Grills Gas TypeH4XN-1 HEX NUT, Lock Phillips Truss Head Screw 10-24 X Hardware PackPhillips Truss Head Screw 10-24 X 3/4 Phillips Truss Head Screw 1/4-20 X 1 1/2Installing the Hose and Regula- tor Installing Radiation ShieldInstalling Control Panel Ignitor Assembly Installing the IgnitorSee Figures 8 Radiation/Wind Shield Burner Assembly Burner bracket to the venturi assemblyHoles. See Figure Installing the Burner Series Burner ShownSeries Shown Handle Installing Flare Busters Lid StopP3X P4X Installing Racks CleaningSee b Checking for Gas Leaks Air Shutter AdjustmentOperation Propane & Natural GAS Grills Operating InstructionsBefore Cooking Electrical AccessoriesOperation PreheatingMaintenance Burn OffTroubleshooting Problem Cause SolutionR3-1, R3N-1 ,R3B-1, R3BN-1 R3B only R3 onlyR3B only Description QTY Supplied Safety Precautions Safety Practices to Avoid Per- sonal InjuryOutdoor USE only Grill Assembly Grill Assembly Grill Assembly Lid stop assembly hardware GAS Conversion to Natural GAS GAS Conversion to Natural GAS Infrared Cooking General OverviewInfrared Cooking Sample Times & Grid Positions Steak 1 ThickCooking Grid Position Air Shutter Adjustment For R3B Series Only Using the IgnitorAvoid Water DAM AGE to Burner Blue Flame Burner Maintenance Clean burner venturi tubes as followsInfrared Burner Maintenance General OverviewStandard Cleaning Burn OffProblem Cause Solution Appliance Service History Appliance Service History Appliance Service History Broilmaster
Related manuals
Manual 56 pages 7.4 Kb

H4PK-1, P3SX-1, H3XN-1, P4XF-1, H3X-1 specifications

Broilmaster is a well-respected name in the world of grilling, known for its high-quality, durable, and innovative products. Among its impressive lineup, the H3XPK-1, H4X-1, P3XFN-1, P3XN-1, and H4XN-1 models stand out as exceptional choices for barbecue enthusiasts. Each model integrates advanced technologies and features designed to enhance the grilling experience.

The Broilmaster H3XPK-1 is celebrated for its robust construction and versatility. Built with a heavy-duty stainless steel burners, it ensures even heat distribution for perfectly cooked meals every time. The H3XPK-1 also features a convenient removable grease tray for easy cleanup, along with a built-in thermometer for precise temperature monitoring. One of the standout features is its high-performance ignition system, which guarantees reliable starts every time.

Similarly, the H4X-1 model offers enhanced grilling capabilities with its larger cooking surface and dual burners. This model is designed for those who love to entertain, providing ample space to cook multiple dishes simultaneously. The heavy-duty grates retain heat well, delivering those sought-after grill marks. Additionally, the H4X-1 includes a side burner for an extra cooking area, making it a versatile addition to any outdoor kitchen.

The P3XFN-1 and P3XN-1 models are particularly suited for those who appreciate portable grilling. The P3XFN-1 is lightweight yet powerful, making it ideal for camping and tailgating. It includes foldable legs, which enhance its portability without compromising on cooking performance. Meanwhile, the P3XN-1 features a compact design that still allows for significant cooking space, perfect for smaller outdoor areas.

Finally, the H4XN-1 combines the best features of its predecessors and adds advanced technology. With its digital control panel, users can easily monitor and adjust the temperature, making precision grilling attainable. The H4XN-1 also comes equipped with integrated LED lighting, allowing for nighttime grilling without hassle.

In summary, each Broilmaster model—from the sturdy H3XPK-1 and H4X-1 to the portable P3XFN-1 and P3XN-1, and finally the tech-savvy H4XN-1—integrates quality, durability, and innovation. Whether for backyard gatherings or on-the-go grilling, these models cater to diverse preferences, ensuring unforgettable outdoor cooking experiences.
Top Page Image Contents