Broilmaster H3XN-1, H4XN-1, H3XPK-1 Operation Propane & Natural GAS Grills, Checking for Gas Leaks

Page 31

OPERATION - PROPANE & NATURAL GAS GRILLS

Checking for Gas Leaks

Check for gas leaks every time you connect your Broilmaster® pro- pane gas grill to a Propane gas cylinder, when a connected cylinder has not been used recently, or when either a natural or propane grill is being used for the first time.

Caution: Do not use an open flame when checking for leaks. Checking for leaks with an open flame may lead to a fire or explosion, resulting in property damage or personal injury.

To check for gas leaks:

1.Use dish washing liquid and a little water to make a soapy solu- tion.

2.Turn OFF the knob on the control panel.

3.Turn ON the gas at the supply or cylinder. A hissing sound indicates a leak. Turn OFF the gas and repair the leak.

4.Apply the soapy water solution to all gas connections.

5.Look for bubbles. Bubbles indicate a leak.

6.If there are bubbles turn OFF the gas and repair the leak.

7.Turn the gas back ON and repeat the above procedures until all leaks are repaired.

Air Shutter Adjustment

The venturi air shutter(s) are preset at the factory so that after five minutes the burner flames are blue with well defined cones. If, after five minutes the flame is yellow, or there is a gap between the burner and the flame, adjust the venturi air shutter as follows:

1.Turn gas OFF and let the burner cool.

2.Loosen shutter set screw

3.Close the air shutter to the minimum opening.

4.Light the burner, wait five minutes and then carefully open the air shutter until the flame is blue and well defined.

5.Retighten the set screw.

Operating Instructions

Using the Ignitor

Caution: If a burner fails to light after 5 seconds, turn the burner OFF for 5 minutes, to allow the gas to clear, then try again.

1.Turn knob on the grill CLOCKWISE to the OFF position.

2.Turn ON gas at the source.

3.With the grill lid open, push and turn the burner control knob COUNTERCLOCKWISE to Hi.

4.Push and hold the ignitor button until the burner lights (approxi- mately 5 seconds).

5.If a burner does not light, turn OFF all gas and refer to the Troubleshooting section of this manual.

Operating Instructions

Using Matches

Caution: If a burner fails to light after 5 seconds, turn the burner OFF for 5 minutes, to allow the gas to clear, then try again.

1.Turn knob on the grill CLOCKWISE to the OFF position.

2.Turn ON gas at the source.

3.Open the grill lid.

4.Insert a burning long wooden match through the lighter hole on either side of the grill. See Figure 21.

5.Turn the burner control knob COUNTERCLOCKWISE to HI.

6.If a burner does not light, turn OFF all gas and refer to the Troubleshooting section of this manual.

Figure 22

B101623-2-0112

Page 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Models If YOU Smell GAS Empire Comfort Systems, Inc CongratulationsTable of Contents Master Parts Distributor List HOW to Order Repair PartsParts Not Under Warranty Warranty PartsP3X Series Parts Diagram Index Part Description Part Number P3X Series Parts ListP3SX P3SXN P3X P3XN P3XF P3XFN P4X Series Parts Diagram P4XN P4XF P4XFN P4X Series Parts ListH3X Series Parts Diagram Index No Part Description Part Number H3X Series Parts ListH3X H3XN H4X Series Parts Diagram H4X H4XN H4X Series Parts ListR3 Series Parts Diagram Index Description Part Number R3 Series Parts ListR3N R3B R3BN Recommended Tools Grill AssemblyWarranty Terms Before You BeginWarranty Terms Grill Location Propane GAS GrillsCylinder Requirements See Figure Propane Cylinder SafetyCylinder Storage Connection RequirementsConnecting to Propane Gas / Cylinder Retention Means Pressure Regulator and Hose AssemblyClockwise Gas Type Natural GAS GrillsH4XN-1 Phillips Truss Head Screw 1/4-20 X 1 1/2 Hardware PackPhillips Truss Head Screw 10-24 X 3/4 HEX NUT, Lock Phillips Truss Head Screw 10-24 XInstalling Radiation Shield Installing the Hose and Regula- torInstalling Control Panel Installing the Ignitor Ignitor AssemblySee Figures 8 Burner bracket to the venturi assembly Radiation/Wind Shield Burner AssemblyHoles. See Figure Series Burner Shown Installing the BurnerSeries Shown Handle Lid Stop Installing Flare BustersP3X P4X Cleaning Installing RacksSee b Operating Instructions Air Shutter AdjustmentOperation Propane & Natural GAS Grills Checking for Gas LeaksPreheating Electrical AccessoriesOperation Before CookingBurn Off MaintenanceProblem Cause Solution TroubleshootingR3-1, R3N-1 ,R3B-1, R3BN-1 R3 only R3B onlyR3B only Description QTY Supplied Safety Practices to Avoid Per- sonal Injury Safety PrecautionsOutdoor USE only Grill Assembly Grill Assembly Grill Assembly Lid stop assembly hardware GAS Conversion to Natural GAS GAS Conversion to Natural GAS General Overview Infrared CookingSteak 1 Thick Infrared Cooking Sample Times & Grid PositionsCooking Grid Position Using the Ignitor Air Shutter Adjustment For R3B Series OnlyAvoid Water DAM AGE to Burner Clean burner venturi tubes as follows Blue Flame Burner MaintenanceGeneral Overview Infrared Burner MaintenanceBurn Off Standard CleaningProblem Cause Solution Appliance Service History Appliance Service History Appliance Service History Broilmaster
Related manuals
Manual 56 pages 7.4 Kb

H4PK-1, P3SX-1, H3XN-1, P4XF-1, H3X-1 specifications

Broilmaster is a well-respected name in the world of grilling, known for its high-quality, durable, and innovative products. Among its impressive lineup, the H3XPK-1, H4X-1, P3XFN-1, P3XN-1, and H4XN-1 models stand out as exceptional choices for barbecue enthusiasts. Each model integrates advanced technologies and features designed to enhance the grilling experience.

The Broilmaster H3XPK-1 is celebrated for its robust construction and versatility. Built with a heavy-duty stainless steel burners, it ensures even heat distribution for perfectly cooked meals every time. The H3XPK-1 also features a convenient removable grease tray for easy cleanup, along with a built-in thermometer for precise temperature monitoring. One of the standout features is its high-performance ignition system, which guarantees reliable starts every time.

Similarly, the H4X-1 model offers enhanced grilling capabilities with its larger cooking surface and dual burners. This model is designed for those who love to entertain, providing ample space to cook multiple dishes simultaneously. The heavy-duty grates retain heat well, delivering those sought-after grill marks. Additionally, the H4X-1 includes a side burner for an extra cooking area, making it a versatile addition to any outdoor kitchen.

The P3XFN-1 and P3XN-1 models are particularly suited for those who appreciate portable grilling. The P3XFN-1 is lightweight yet powerful, making it ideal for camping and tailgating. It includes foldable legs, which enhance its portability without compromising on cooking performance. Meanwhile, the P3XN-1 features a compact design that still allows for significant cooking space, perfect for smaller outdoor areas.

Finally, the H4XN-1 combines the best features of its predecessors and adds advanced technology. With its digital control panel, users can easily monitor and adjust the temperature, making precision grilling attainable. The H4XN-1 also comes equipped with integrated LED lighting, allowing for nighttime grilling without hassle.

In summary, each Broilmaster model—from the sturdy H3XPK-1 and H4X-1 to the portable P3XFN-1 and P3XN-1, and finally the tech-savvy H4XN-1—integrates quality, durability, and innovation. Whether for backyard gatherings or on-the-go grilling, these models cater to diverse preferences, ensuring unforgettable outdoor cooking experiences.
Top Page Image Contents