GRILL ASSEMBLY
1.Mount grill onto cart, post or base per the mount- ing instructions.
2.Place radiation shield (flange side up) onto four raised bosses located on the interior bottom of the grill. See Figure 20.
Figure 20
3.R3B model only: Slide ignitor spacer onto collector box assembly and secure with nuts. See Figure 21.
Figure 21
Attention: Do not cut or damage ignitor wires.
4.R3B model only: Insert collector box assembly into hole adjacent to burner. The opening of the collec- tor box should be facing the burner. The infrared ignitor wire slides through the empty hole next to the burner. See Figure 22.
R3B
R3
Figure 22
Page 33 |