Broilmaster P3SXN-1 manual Radiation Shield, Installing Burner Bracket, Installing the Burner

GRILL ASSEMBLY

Radiation Shield

Place the radiation shield in the grill bottom.

See Figure 9.

Figure 9

Installing Burner Bracket

Hand bend the bracket as shown in Figure 10. Insert bracket screw in the bottom of the casting and secure with 1/4”-20 nut. Do not tighten.

P3X/H3X P4X

BEFORE BEFORE

AFTERAFTER

Figure 10

Installing the Burner

Insert the burner assembly into the grill bottom with the venturi tubes facing the front of the grill. See Figure 11.

Slide the venturi on top of the valve assembly. Attach burner bracket to venturi and secure it with #8-32 x 1/2” screw. Tighten the 1/4”-20 nut inside the grill. See Figure 12.

Figure 11

Note: Bowtie burner is shown. The instructions for installing the “H” burners is the same.

Note: If the Grill Head is installed on a PCB1 or DCB1, make sure the burner bracket is mounted on the burner be- fore installing it.

Figure 12

B101525-4-0411 Page 23