Miele CS 1421 Safety features, Safe retraction, Height recognition, Overheat protection

Page 12

Safety features

Safe retraction

To avoid damaging the appliance, your grill is equipped with a retraction safety device. The browning unit can be fully retracted only once the appliance has cooled sufficiently, i.e., after the residual heat indicator has gone out.

Height recognition

The unit heats up only when the browning unit is raised at least 2 3/4" (70 mm) above the ledge.

Overheat protection

The halogen heating element in the browning unit is equipped with overheat protection. This feature automatically switches off the heating element if the ceramic cooktop is in danger of overheating. Once the ceramic surface has cooled down sufficiently, the heating element automatically switches back on. You will recognize activation of the overheat protection if the heat keeps switching on and off at the highest power setting.

Obstruction protection

As soon as the browning unit encounters any resistance with a diameter greater than 3/8 " (10 mm) between the browning unit and the ledge, the process is interrupted and the browning unit automatically rises again by about 3/8" (10 mm).

12

Image 12
Contents Operating and Installation Instructions Salamander Grill Contents Safety instructions and warnings Correct useChildren Technical safety Correct use Save These Instructions and Review Them Periodically Description of the unit DisplayBefore using for the first time Clean the applianceSwitching on and off OperationRaising and lowering the browning unit Browning Useful tipsKeeping food warm After useSafety features Safe retractionHeight recognition Overheat protectionCare and cleaning To avoid damge, do not use the following cleaning productsStainless steel LedgeBuilt-in frame Ceramic surface of the browning unitFrequently asked questions Unit will not raise? Possible fault SolutionUnit will not heat up? Possible fault Solution Unit will not retract? Possible fault SolutionTechnical Service Installation Instructions Safety Instructions for Installation Safety distances above the appliance Safety distances to the sides of the appliance 50 mm150 mm 10 250 mm for Recommended Not recommended Not allowedInstallation Installation dimensionsCut out Installation of multiple appliances Countertop cut-out two appliancesCountertop cut-out three appliances Countertop Cut-out500 Attach the spring clips and support bars Wood or solid surface countertops Granite countertopInstallation Installing the appliance Sealing Tiled surfaces Electrical connection Help protect our environment Disposal of packing materialsDisposal of an old appliance