Miele CS 1421 installation instructions Correct use

Page 6

Safety instructions and warnings

~Repair of the appliance during the warranty period should be performed only by Customer Service personnel who are duly authorized by the manufacturer; otherwise any damage will not be covered by the warranty.

~Before any maintenance or repair work is performed, the appliance must be disconnected from the main power supply. It is electrically disconnected only when one of the following conditions is met:

the fuses or circuit breakers are tripped.

the screw-in type fuses are fully unscrewed.

the power cord is disconnected from the electrical power supply. To disconnect appliances with plugs, pull on the plug itself, instead of on the cord.

~Defective components should be replaced by Miele original replacement parts only. Only these parts are guaranteed by the manufacturer to comply with safety requirements.

~Do not operate the grill if there is a defect or if the ceramic surface of the browning unit is cracked, chipped or damaged in any way. Immediately switch it off. Then disconnect it from the power supply. If you fail to follow these steps, there is a danger of electric shock!

Correct use

~The appliance becomes hot during use and remains so for some time after being switched off. Caution: Danger of burns!

~Protect your hands whenever

working with a hot appliance - wear oven mitts and use potholders, for example, making sure that they are not wet or damp. Moisture would only increase heat conductivity, potentially causing burns.

~NEVER use the appliance to heat up sealed containers, such as canned foods. The resulting build-up of pressure can cause containers to explode, with the risk of injury and burns.

~Do not use the appliance as a space heater. The high temperatures can cause easily flammable materials in the vicinity to catch fire. This will also reduce the lifespan of the appliance.

6

Image 6
Contents Operating and Installation Instructions Salamander Grill Contents Safety instructions and warnings Correct useChildren Technical safety Correct use Save These Instructions and Review Them Periodically Description of the unit DisplayBefore using for the first time Clean the applianceSwitching on and off OperationRaising and lowering the browning unit Keeping food warm BrowningUseful tips After useHeight recognition Safety featuresSafe retraction Overheat protectionCare and cleaning To avoid damge, do not use the following cleaning productsBuilt-in frame Stainless steelLedge Ceramic surface of the browning unitUnit will not heat up? Possible fault Solution Frequently asked questionsUnit will not raise? Possible fault Solution Unit will not retract? Possible fault SolutionTechnical Service Installation Instructions Safety Instructions for Installation Safety distances above the appliance 150 mm Safety distances to the sides of the appliance50 mm 10 250 mm for Recommended Not recommended Not allowedInstallation Installation dimensionsCut out Installation of multiple appliances Countertop cut-out two appliancesCountertop cut-out three appliances Countertop Cut-out500 Attach the spring clips and support bars Wood or solid surface countertops Granite countertopInstallation Installing the appliance Sealing Tiled surfaces Electrical connection Help protect our environment Disposal of packing materialsDisposal of an old appliance