Frequently asked questions
Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The manufacturer cannot be held responsible for unauthorized work.
The unit will not raise?
Possible fault |
| Solution | |
|
| ||
Dirt has built up in the gap around the | Remove the dirt or the object which has | ||
browning unit or something has | become stuck. | ||
become stuck. |
|
|
|
|
| ||
The fuse or breaker was tripped. | Contact a qualified electrician or Miele | ||
|
| Technical Service for assistance. | |
|
|
| |
The unit will not heat up? |
|
| |
Possible fault |
| Solution | |
|
| ||
The browning unit is not raised | Raise the browning unit by at least | ||
sufficiently, by at least 2 3/ | " (70 mm). | 2 3/ | " (70 mm). |
4 |
| 4 |
|
The ledge is not inserted or positioned | Insert the ledge or postion it correctly. | ||
correctly. |
|
|
|
|
| ||
There has been a power outage during | To place the appliance back in | ||
operation, and the heating has been | operation, turn the control knob to "0" | ||
shut off. |
| and fully lower the browning unit. | |
|
|
|
|
The unit will not retract? |
|
|
|
Possible fault |
| Solution | |
|
| ||
The appliance is not sufficiently cooled | The residual heat indicator must be off | ||
down. The residual heat indicator must | before the unit can be retracted. | ||
be off. |
|
|
|
|
| ||
The ledge is not positioned correctly. | Postion the ledge correctly | ||
|
| ||
When retracted, the browning unit continues to move slightly upwards | |||
Possible fault |
| Solution | |
|
| ||
An object has come between the | Remove the object (see "Safety | ||
browning unit and the ledge | features / Obstruction protection"). | ||
|
|
|
|
15